ā11-28-2011 12:54 AM - edited ā03-11-2019 02:55 PM
hello
i have ASA firewall and three seperate web servers. and i have 1 public ip address. i need to publish all this web servers with this ip address. how can i make asa to nat packets according to the web addresses?
Thanks
Solved! Go to Solution.
ā11-28-2011 01:20 PM
Hi,
no this is not possible, you'll have to use different external ports for each server otherwise you'll have to ask for 2 more static IP addresses from provider.
Regards.
Alain
ā11-28-2011 03:07 AM
you're going to do 2 things
configure port forwarding rule with different ports
configure access lists to open the ports on the interface
externally, users will need to navigate to the http://publicipaddress:port
good luck
ā11-28-2011 03:15 AM
Thats correct port forwarding will be the solution but the configuration depends upon ASA version you are using.
Thanks
Ajay
ā11-28-2011 09:18 AM
i dont want to change ports. i want all the servers to use 80 port.
for example i have three web servers with three different web pages on them. www.1.com www.2.com and www.3.com
is it possoble for asa to inspect which web page client connects to and direct traffic to that server ?
every server must use 80 port.
thanks
ā11-28-2011 01:20 PM
Hi,
no this is not possible, you'll have to use different external ports for each server otherwise you'll have to ask for 2 more static IP addresses from provider.
Regards.
Alain
ā11-29-2011 08:30 AM
Thank you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide