cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

163
Views
10
Helpful
4
Replies
Highlighted
Rising star

ASA5510 two Interfaces are 1Gb, other interfaces 10/100?

Hi Guys,

I ran into discover that ASA5510 that we are using for guest wifi access has only two interfaces are capable of 1Gb and interface Ethernet0/2 and Ethernet0/3 are 10/100 only.

Is there anyway that can be change with IOS upgrade on ASA5510 to enable Ethernet0/2 and Ethernet0/3 to be 1Gb as well?

I had connected port Ethernet0/2 to 7K by creating sub-interface, it shows no error on physcial interface Ethernet0/2 on Solarwinds monitoring but I see tons of error on sub-interface Ethernet0/2.100.

Anyone has any thoughts on how to resolve this sub-interface errors?

thanks

4 REPLIES 4
Highlighted
Cisco Employee

Hello; 

Hello; 

What kind of errors are you seeing? No, there is no way to change 0/2 and 0/3 to be one Gig. 

Mike. 

Mike
Highlighted
Rising star

Hi Maykol,

Hi Maykol,

Thanks for your reply.

The amount of discard is what most concern me, please see the attached Solarwinds monitoring image.

Highlighted
Cisco Employee

Hello; 

Hello; 

How fast are they incrementing?

Mike.

Mike
Highlighted
Rising star

about 4 thousands discard for

about 4 thousands discard for an hour.