12-30-2015 08:59 AM - edited 03-12-2019 12:05 AM
Hi Guys,
I ran into discover that ASA5510 that we are using for guest wifi access has only two interfaces are capable of 1Gb and interface Ethernet0/2 and Ethernet0/3 are 10/100 only.
Is there anyway that can be change with IOS upgrade on ASA5510 to enable Ethernet0/2 and Ethernet0/3 to be 1Gb as well?
I had connected port Ethernet0/2 to 7K by creating sub-interface, it shows no error on physcial interface Ethernet0/2 on Solarwinds monitoring but I see tons of error on sub-interface Ethernet0/2.100.
Anyone has any thoughts on how to resolve this sub-interface errors?
thanks
12-30-2015 10:15 AM
Hello;
What kind of errors are you seeing? No, there is no way to change 0/2 and 0/3 to be one Gig.
Mike.
01-05-2016 06:42 AM
01-05-2016 06:47 AM
Hello;
How fast are they incrementing?
Mike.
01-05-2016 12:53 PM
about 4 thousands discard for an hour.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide