Hi,
We have bought a Cisco ASA5512 from our supplier which comes with the IPS and the license.
When i login using session ips command i get the following.
***LICENSE NOTICE***
There is no license key installed on this IPS platform.
The system will continue to operate with the currently installed
signature set. A valid license must be obtained in order to apply
signature updates. Please go to http://www.cisco.com/go/license
to obtain a new license or install a license.
test#
Below is a show output.
TEST-ASA# show module ips
Mod Card Type Model Serial No.
---- -------------------------------------------- ------------------ -----------
ips ASA 5512-X IPS Security Services Processor ASA5512-IPS FCH1712J7HD
Mod MAC Address Range Hw Version Fw Version Sw Version
---- --------------------------------- ------------ ------------ ---------------
ips 7cad.746f.8bec to 7cad.746f.8bec N/A N/A 7.1(4)E4
Mod SSM Application Name Status SSM Application Version
---- ------------------------------ ---------------- --------------------------
ips IPS Up 7.1(4)E4
Mod Status Data Plane Status Compatibility
---- ------------------ --------------------- -------------
ips Up Up
Mod License Name License Status Time Remaining
---- -------------- --------------- ---------------
ips IPS Module Enabled perpetual
Do i need to enter a key into the ASA or something to enable it?
Thanks