Hi, If I have two web servers (say 10.1.1.1:80 & 10.1.1.2:81) in a DMZ, is it sufficient enough to add a static NAT or PAT only and the servers will be reachable from outside on those ports?Or do you need an outgoing dynamic nat in order for those se...
Hi, I have a asa 5585-x the internal data ports are having alot of input errors and overrun also there is huge number for no buffer count is this something we have worry about?
I have an ASA 5545-X with SourceFire and the module is reaching over 90% of CPU usage (not all the time only during working hours). However I can see that only 1 CPU (there are 6) is reaching that limit. I have two questions: does the SourceFire modu...
Hello, I have two ASA 5512 and two ISP modem first I want to setup each ASA for load balancing interface wan1, interface wan2 and ech interface is a PPPoE connection , so is it possible ! secondly after configurating those two ASA for load balancing,...
I've seen a lot of people complain about this, but I haven't found any suggestions that work. Our Internet connection is 100 Mbps, but the ASA limits it to 30 Mbps. I've completely blown away the configuration and only put on the inside and outside I...
Hi, I have an issue like large files download drops or take much longer time than expected . How do i verify asa drops or its not an ASA issue. It may the ISP limiting the bandwidth Thanks
Hi, I have an OUTSIDE interface (goes to another private network 10.1.1.254/24) On the INSIDE interface (192.168.200.0/24) we have various servers. These are statically natted to a different ip eg 10.1.1.1 > 192.168.200.1, 10.1.1.2 > 192.168.200.10 e...
basically what it says on the tin. I need a way to change the password of a net user named (without quotes) "building house" (for example) via the command line interface. The command would, I guess, be config netuser password <username> <password> .....
Hello, I recently purchased 2 asa 5510 used, and one of the asa's has version 8.4.1 and the other version 8.2.5. My question is can I copy the version 8.4.1 onto the version 8.2.5 and will I need a seperate license to do this? Kind regards, Gary Lef...
Hello guys, I have a confusion related to Firepower management and its license. We bought ASA 5516-X with firepower serves along with 3 Licenses. 1. URL Filtering 2. IPS 3. AMP I want to manage Firepower services with Firesight. My question is do i ...
hi all, one of our site has an Ipoque DPI device that failed recently (currently on fail-to-wire). it would take a while for it to be replaced since it's a remote location. and we don't have the budget to do websense or IPS (FirePower). i would like ...
Hi Folks, When FMC performs passive network discovery it is not interacting with end hosts, it is paying extra attention to syn and syn-ack packets and determining OS definitions based on known output from ip headers. Can anyone point me in the dir...
Hi, We recently start to use the ASA-AWS but we are unable to run the http://IP/admin for enter on the ASDM. In the other hand i can enter without problem by ssh and running all the command from there. Is there something that i need to configure to...
Hi All,I have a 2 ASA 5520 firewalls for high availability and need to upgrade IOS from 7.2(4) to 8.2 or latest.Can someone suggest me what could be the better way and upgrade procedure.Please find the below show version details and I hope I can go a...
Hello, I have a device that needs to be reached from outside on port 443. I am trying to redirect all the requests that come from outside on port 443, to 192.168.1.25 on port 443. I configured it in ASDM, however I see this in the logs: 4 May 22 2...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 08-29-2025 08:17 AM | ||
| 08-26-2025 09:16 AM | ||
| 07-16-2025 04:21 AM | ||
| 07-06-2025 01:40 PM | ||
| 07-04-2025 01:59 AM |
| User | Count |
|---|---|
| 8 | |
| 7 | |
| 5 | |
| 1 | |
| 1 |
