Hi i scheduled report and it generates automaticly. how can i send it automaticly with email zafer
Hi i scheduled report and it generates automaticly. how can i send it automaticly with email zafer
To enable VPN Clustering and Load Balancing in the ASA 5585-X ASA SSP-10 FP SSP-10 must to add the Security Plus license or any extra license .
Hello All, I have a change in design with my ASA (Active / standby) connecting two stand alone switches. I previously had the active ASA connected to Switch 1 and the standby connected to switch 2. The two switches were trunked via a physical cable....
Hello, we have a Esxi server with 15 VMs installed and i wanted to deploy Cisco ASAv in transparent mode. The problem is when i config the asa and power it on the whole network and VMs connectivity will be lost. I used an IP address in the VMs networ...
Firesight management gui session terminates randomly. It is not idle time out. Once the management session terminated from the browser I have to wait about 5 minutes before I can get back to the management session. I used IE, firefox, chrome and it h...
Hi All I want to have 4 ports on my asa 5506-X as part of the same network, effectively using them as switchports on the same network On my other ASA's I normally put them in the same vlan, however I cannot do it on this firewall. what do I need to d...
I can log into the ASDM gui and see the asa 5506x and the firepower module status TAB om the status page The ASDM no longer has the firepower bottom left access tab in the config page , thus I can't add the missing license back in, I do not know why ...
Hi, I have one ASA5525-X using the 9.2(4) IOS. it's configured Active/Standby HA with success. The problem ocurred when I rebooted the Active ASA to simulating a fail, after this time it's not detect the other ASA and both are active. When it's boot ...
Hello Team, 1 issue:-> I have 2 cisco asa5585 when i have configuration regular failove link between these 2 asa management IP address of secondary asa aslo changing to as primary asa mgmt ip address i need separate mgmt ip address for both asa but b...
Hi, We are looking to acquire ASA5512-SSD120-K9 or ASA5515-SSD120-K9 to control Websites access & control applications. Question 1. Can these models support AVC & WSE at the same time on a single ASA NGFW ? Are there anything else to acquire to enabl...
I am procuring ASA5525X with FirePOWER Services & FireSight Management appliance. Is FireSight Management appliance is used to manage IPS part only? Can it be used to manage the ASA firewall as well? Will it collect the firewall logs (not IPS) logs f...
Hi, I'm connected using anyconnect but the prob is I can't ping and access internal network. TEST# sh run ASA Version 9.2(2)4 ! hostname TEST domain-name test.com names ip local pool vpnpool 10.34.17.1-10.34.17.252 mask 255.255.240.0 ! interface Gi...
Unable to launch ASDM from x.x.x.x: java.lang.IllegalArgumentException: SSLv2Hello cannot be enabled unless at least one other supported version is also enabled OS : Windows 7 i install : ASDM ver : asdm-602 jre-7u79-windows-i586 jdk-7u79-windows-x64...
Hi, I would like to as the ff. 1. Is it possible to manually setup the time? 2 I have setup the application control. but its not working. the application still running. thanks
Hello, I need Multicast Routing PIM-SM for an ASA 5525-X running in multiple context mode. When does this feature is supported? If there are any roadmap? Regards Michael
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 06-05-2026 10:49 AM | ||
| 05-26-2026 07:54 AM | ||
| 05-02-2026 06:09 AM | ||
| 04-30-2026 12:46 AM | ||
| 04-24-2026 07:04 AM |