Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About tstrode01
Stats
Member since
08-26-2015
20
Posts
0
Helpful
0
Solutions
05-09-2019
08:31 AM
I use the copy usbflash0:filename.bin flash: command. When I look in flash, this what I see: frcsw1#sh flash: -#- --length-- ---------date/time--------- path 2 2097152 May 09 2019 07:18:16.0000000000 +00:00 nvram_config 3 74369716 Jul 17 2015 15:29:27.0000000000 +00:00 cat3k_caa-base.SPA.03.02.03.SE.pkg 4 5808828 Jul 17 2015 15:29:27.0000000000 +00:00 cat3k_caa-drivers.SPA.03.02.03.SE.pkg 5 32496484 Jul 17 2015 15:29:27.0000000000 +00:00 cat3k_caa-infra.SPA.03.02.03.SE.pkg 6 30418104 Jul 17 2015 15:29:27.0000000000 +00:00 cat3k_caa-iosd-universalk9.SPA.150-1.EX3.pkg 7 16059104 Jul 17 2015 15:29:27.0000000000 +00:00 cat3k_caa-platform.SPA.03.02.03.SE.pkg 8 64586444 Jul 17 2015 15:29:27.0000000000 +00:00 cat3k_caa-wcm.SPA.10.0.120.0.pkg 9 1237 Nov 10 2015 12:33:32.0000000000 +00:00 packages.conf 10 4096 Nov 10 2015 12:34:00.0000000000 +00:00 mnt 11 4096 Nov 10 2015 12:34:00.0000000000 +00:00 mnt/images 12 4096 Nov 10 2015 12:34:01.0000000000 +00:00 mnt/images/ap.bak 13 40 Jul 21 2015 20:05:14.0000000000 +00:00 mnt/images/ap.bak/ap1g2.md5 14 11919360 Jul 21 2015 20:05:14.0000000000 +00:00 mnt/images/ap.bak/ap1g2 15 40 Jul 21 2015 20:05:14.0000000000 +00:00 mnt/images/ap.bak/ap3g1.md5 16 9830400 Jul 21 2015 20:05:14.0000000000 +00:00 mnt/images/ap.bak/ap3g1 17 40 Jul 21 2015 20:05:14.0000000000 +00:00 mnt/images/ap.bak/ap3g2.md5 18 13537280 Jul 21 2015 20:05:14.0000000000 +00:00 mnt/images/ap.bak/ap3g2 19 40 Jul 21 2015 20:05:14.0000000000 +00:00 mnt/images/ap.bak/c1140.md5 20 8744960 Jul 21 2015 20:05:14.0000000000 +00:00 mnt/images/ap.bak/c1140 21 63 Jul 21 2015 20:05:14.0000000000 +00:00 mnt/images/ap.bak/install.fstab 22 11 Jul 21 2015 20:05:14.0000000000 +00:00 mnt/images/ap.bak/version.info 23 1224 Jul 17 2015 15:29:37.0000000000 +00:00 packages.conf.00- 24 82016892 Nov 10 2015 12:33:27.0000000000 +00:00 cat3k_caa-base.SPA.03.07.02E.pkg 25 5649084 Nov 10 2015 12:33:27.0000000000 +00:00 cat3k_caa-drivers.SPA.03.07.02E.pkg 26 36928520 Nov 10 2015 12:33:27.0000000000 +00:00 cat3k_caa-infra.SPA.03.07.02E.pkg 27 46146880 Nov 10 2015 12:33:27.0000000000 +00:00 cat3k_caa-iosd-universalk9.SPA.152-3.E2.pkg 28 28859276 Nov 10 2015 12:33:27.0000000000 +00:00 cat3k_caa-platform.SPA.03.07.02E.pkg 29 111549248 Nov 10 2015 12:33:28.0000000000 +00:00 cat3k_caa-wcm.SPA.10.3.120.0.pkg 30 4096 Nov 10 2015 12:53:37.0000000000 +00:00 virtual-instance 31 4096 May 09 2019 07:17:25.0000000000 +00:00 dc_profile_dir 32 185274 May 09 2019 07:17:25.0000000000 +00:00 dc_profile_dir/dc_default_profiles.txt 33 178966 May 09 2019 07:17:25.0000000000 +00:00 dc_profile_dir/dc_default_profiles.txt.bkp 34 4096 Nov 10 2015 12:55:12.0000000000 +00:00 wnweb_store 35 4096 Nov 10 2015 12:55:12.0000000000 +00:00 wnweb_store/container_file 36 4096 Nov 10 2015 12:55:12.0000000000 +00:00 wnweb_store/container_file/f 37 4096 Nov 10 2015 12:55:12.0000000000 +00:00 wnweb_store/container_file/f/fb 38 211 Nov 10 2015 12:55:12.0000000000 +00:00 wnweb_store/container_file/f/fb/fbdb00b653a3412a841145c1b89a0d2e.cache 39 4096 Nov 10 2015 12:55:12.0000000000 +00:00 wnweb_store/container_file_lock 40 4096 Nov 10 2015 12:55:12.0000000000 +00:00 wnweb_store/container_file_lock/3 41 4096 Nov 10 2015 12:55:12.0000000000 +00:00 wnweb_store/container_file_lock/3/3b 42 0 Nov 10 2015 12:55:12.0000000000 +00:00 wnweb_store/container_file_lock/3/3b/3b00d2e4d13f1aa79dc0cf3a34b6561175a0fc46.lock 43 4096 Nov 10 2015 12:55:12.0000000000 +00:00 wnweb_store/container_file_lock/1 44 4096 Nov 10 2015 12:55:12.0000000000 +00:00 wnweb_store/container_file_lock/1/1b 45 0 Nov 10 2015 12:55:12.0000000000 +00:00 wnweb_store/container_file_lock/1/1b/1b87628f190693104723d1f22d502c001cb0d7dd.lock 46 676 May 09 2019 07:18:02.0000000000 +00:00 vlan.dat 47 328618032 May 09 2019 06:25:22.0000000000 +00:00 y 625819648 bytes available (913756160 bytes used)
... View more
05-09-2019
07:56 AM
Looking in the flash directory, the path just says "y" instead of the proper file name.
... View more
05-09-2019
07:49 AM
I execute the command to copy the image to flash, it goes through and says it copied the file, but it is not listed in the directory.
... View more
05-09-2019
07:48 AM
I execute the command to copy the image to flash, it goes through and says it copied the file, but it is not listed in the directory.
... View more
05-09-2019
05:43 AM
Hello, I tried to upgrade one of our 3850 switches from 3.7.2 to 3.7.5 but ran into a issue. I followed the recommended procedures installing from a usb drive. The problem is I can see the file on usbflash0:, it says it is copying to flash: successfully when I issue the command, however, when I look in dir flash: or sh flash: the file is not there. Of course I reload and the switch has no IOS to load (and I failed to make a backup). Now, the only way to access the full switch config is to boot of the usb drive. I have even tried a different install file with no change. I am not sure how to fix this.
... View more
Labels:
Created by
tstrode01
in Wireless Security and Network Management
in Wireless Security and Network Management
02-21-2019
08:32 AM
02-21-2019
08:32 AM
I have set up site maps inside Prime 3.2. However, I am not getting any color representation on the maps. The APs have been in the proper locations on the floor maps. Am I missing a step or a setting?
... View more
Created by
tstrode01
in Wireless and Mobility
in Wireless and Mobility
08-30-2018
05:44 AM
08-30-2018
05:44 AM
When connected, they get a 169.x.x.x address.
... View more
08-29-2018
09:05 AM
I have a strange issue that I am having trouble finding a solution.
One building on our campus loses connectivity every few months. When I troubleshoot the 3850 for that location, I notice an exponential increase in crc errors on the link back to the core switch. The core side does not see the errors. I swap out fiber patch cables at both ends, as well as SFPs. The only thing that resolves the issue until the next time it arises is switching fiber pairs. We have had all twelves of fiber recertified and does not register any issues.
Has anyone experienced this or have a solution?
... View more
Labels:
08-29-2018
08:55 AM
Hello,
We recently switched from using a AD credentials to log into the wireless network, to using public wifi. There is no splash screen or authentication of any kind. However, some students are having issues connecting to the public wifi. Some devices say "connecting..." but never connect; others connect but have cannot get out to the Internet. This has been happening a lot on Macbooks, but some android and PC devices are affected as well.
... View more
Labels:
Created by
tstrode01
in Wireless and Mobility
in Wireless and Mobility
07-11-2018
08:33 AM
07-11-2018
08:33 AM
I ran a system diagnostic on a 3850 running 3.7.5, using the Cisco CLI Analyzer tool, and received the following danger message:
Cisco IOS-XE System Diagnostics: Invalid # of commands for workflow steps: 174
I am trying to figure out what this exactly means and how to address it.
Thanks,
Terry
... View more
Labels:
Created by
tstrode01
in Other Security Subjects
in Other Security Subjects
04-03-2018
01:40 PM
04-03-2018
01:40 PM
Hello,
I am having an issue setting up the email notifications in Firepower. Every time I test I get "Failed to send message, check your settings," but I am unsure which setting(s) are incorrect. I followed the steps in the system config guide.
... View more
Labels:
Created by
tstrode01
in Network Management
in Network Management
02-02-2018
08:05 AM
02-02-2018
08:05 AM
How do I turn it off?
... View more
02-02-2018
06:34 AM
Hello,
I started receiving these alerts from Prime for multiple switches in our network:
PI has detected one or more alarms of category Switches and Routers and severity Critical in Virtual Domain ROOT-DOMAIN for the following items:
1. Timestamp: 2018-01-30 10:56:31.097
Alarm Condition: Link down
Message: Interface GigabitEthernet1/0/3, changed state to down Failure Source: xxx-idf-sw1.xxx.xxx:Interface GigabitEthernet1/0/3
The links that referenced in the alerts are not trunk ports, just standard ports. I'm hesitant to change any settings in Prime as this has never happened before.
Could there be another issue?
... View more
Labels:
Created by
tstrode01
in Wireless Security and Network Management
in Wireless Security and Network Management
08-02-2017
06:51 AM
08-02-2017
06:51 AM
We have a device portal set up for students to register certain endpoints such as PS4s and XBoxes. At the end of each semester we want to clear out all devices that are registered in the device portal. What is the best way to do that? Is it through ISE, Prime, or WLC? Is there another method? What is best practice?
Thanks,
Terry
... View more
05-09-2019
I use the copy usbflash0:filename.bin flash: command.When I look in
flash, this what I see: frcsw1#s...
05-09-2019
I execute the command to copy the image to flash, it goes through and
says it copied the file, but i...
05-09-2019
I execute the command to copy the image to flash, it goes through and
says it copied the file, but i...
05-09-2019
Hello,I tried to upgrade one of our 3850 switches from 3.7.2 to 3.7.5
but ran into a issue. I follow...
Created by
tstrode01
in Identity Services Engine (ISE)
04-26-2019
04-26-2019
Hello,Is there a way to download the configuration files for ISE, Prime,
and MSE from our current en...
Created by
tstrode01
in Wireless Security and Network Management
02-21-2019
02-21-2019
I have set up site maps inside Prime 3.2. However, I am not getting any
color representation on the ...
08-29-2018
I have a strange issue that I am having trouble finding a solution. One
building on our campus loses...
08-29-2018
Hello, We recently switched from using a AD credentials to log into the
wireless network, to using p...
Created by
tstrode01
in Wireless and Mobility
07-11-2018
07-11-2018
I ran a system diagnostic on a 3850 running 3.7.5, using the Cisco CLI
Analyzer tool, and received t...
04-03-2018
Hello, I am having an issue setting up the email notifications in
Firepower. Every time I test I get...
Public Statistics
| Date Registered | 08-26-2015 06:08 AM |
| Date Last Visited | 05-15-2019 12:03 AM |
| Total Messages Posted | 20 |
