Hello all...
Wanted to lab a up a scenario using ez-vpn between two routers- the head end\server being a 7200. I'm trying to get the client router to use a virtual interface ( DVTI) in network extension mode but no matter what router\ios I use here,...
Hello all. I was labbing up an upcoming project...and found that I can not get a simple tunnel to come up between 2 7200 series routers. I've triple checked everything..re-wrote the config. There is no debug info either (debug crypto isakmp )...so it...
Hello all.... I have a simple ASA (v 7.2 (4) base license) dhcp relay that is just not working... I'm not sure I ever set up relaying on an ASA before but there's a first time for everything. So...as my incredibly basic drawing shows, I want to DH...
I ran into a situation where one interface on an ASA was linked to another partners router via a public IP in order to service a web portal application. The LAN side interface of the ASA is connected to a private address space, and the entire address...
Hello all. I'm having an issue advertising the transit networks between the P and PE routers via this labbed MPLS\MP BGP network. My attempt was to achieve end to end connectivity via BGP-using an different EBGP AS for each site- and IBGP among the P...
Thanks for the reply- I am aware that the guide is based on 15.x code. However, I was hoping for some more substantial support from someone who has configured EZ-VPN in this way before.
I did find this below: Seems 12.4 and higher is indeed support...
Yeah...I did add GETVPN to another lab also with MPLS -- that one is here:
http://techjuice.blogspot.com/2014/10/mpls3-with-getvpn.html
Different than what you're trying to do though. I have my KS server on the customer private network. And I'm usi...
Hello mediaos...
yeah - that was quite some time ago. I put that up on my blog if you want to take a look- hopefully it will help you. I kind of worked through the config, making notes along that way
Here's the link - http://techjuice.blogspot.co...
Uhhh...figured it out. My own oversight! The access-list 123...I had a 10 in there thinking it was the line sequence, when it was the specifier for an IP protocol number! Stupid!
Created a new ACL with a named format...and success ! Thanks all
Ex...
Correct Richard on both counts,,,,thanks for taking a look
Version is
C7200-ADVENTERPRISEK9-M), Version 15.2(4)
I just dug up another lab with a slightly different and more complex arrangement...and that is fine. Same routers\images\version\PC\GNS3...
