Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

Hello friendsOne of my customers has a couple of ASA 5545 working pretty well as Active / Standby Failover. But the configuration that is not copied to the Secondary unit is the CX configuration. Do you know how to get it? Please, feel free to reques...

I have a strange issue that I cannot seem to figure out. We have a customer that has 2 different ASA's for 2 different environments. We have a vpn tunnel set up so that when they connect to the anyconnect client via Firewall-A, the traffic can hairpi...

Hello, I have a question regarding license with dual 6500's for an FWSM with VSS. If I'm running VSS does the 6500 see the FWSMs as two separate firewalls., or still as one. I ask because of the fail over for it that I would like to setup. Thanks in ...

HiI have a pair of firewall 5520 which is running 8.2(5) image.Recently I am facing the "HA state progression failed" failover issue in the secondary unit which forces the secondary unit to failover disabled stage. Any body have idea why it is happen...

Hi all,No matter what I tried I couldn`t manage the forward port tcp 9100 to my internal host 192.168.144.80, even though packet tracer shows packet is allowed.FW: 8.4.I used and CLI and ASDM but no success.-When I enter below command it is giving  e...

Izac ICT by Level 2
  • 718 Views
  • 2 replies
  • 0 Helpful votes

Hi,I have ASA 5510, FW:8.4 and ASDM 6.4.I`m trying to forward port 2222 to my Synology NAS but not successful. I added access rule, created NAT but no success. Please check attached file to see how I created. Should I add static route, too? I also wa...

Izac ICT by Level 2
  • 3503 Views
  • 11 replies
  • 0 Helpful votes

Dears,what precaution I have to take before upgrade,I am upgrading ASA-SM image 8.5.1 to 9.1(2) and then 9.3(1) .And for ASDM direct upgrade from 6.5 to 7.3.I have to upload both the images in Disk0 as per the link below  it is showing in Disk0?? but...