Network Security

How can tell me how to configure our ASA to nat our to internetconnections, at the moment the first work fine, ISP1                        NAT                        ASA5510      LANISP2                         NATRegards

I have been using static NAT to map between a single server behind an ASA 5505 and a single public IP address. In other words, I've been doing this:object network NAT_ME nat (inside,outside) static interfaceNow I would like to start using the clientl...

Hi does the cisco security builder still exists?Sent from Cisco Technical Support iPad App

Dear all i restarted my pix firewall cisco pix 515 and when i start it again the Act lamp and the firewall didn&#39;t work what can i do please??it is urgent...---Posted by WebUser <a href="http://www.facebook.com/profile.php?id=1514452771" target="_...

Hey guys-  Just had some questions pertaining to some IPS functionality, any help will be greatly appreciated!PS - This is pertaining to the IPS/IDS 4215 if that matters.1.  When creating an IPS inline-vlan-pair, does it matter which VLAN's get desig...

Hi,I'm having an issue polling the external interface of my firewall using SNMP. I can ping it from the poller, and the firewall is configured to allow the access, but it fails.=========================================================================...

I have a couple of 5505's with base licenses. One of the two has a limited output when running the sho version command, as it has a restricted license. Can anyone tell me what license I would need to buy in order to bring it up to "normal" base licen...

Hello,So I was doing some testing with my BB Playbook where I wanted to see what outside connections it tried to make during startup and whatnot. I have a pix 506e running 6.3(5). I created an simple 'deny ip any any' access list on the inside interf...

Hai,I have faced an issue for accessing my ASA 5550 via http. I configured http server enable and the required access for the firewall.I have configured firewall in mode multiple, in which i have one admin context , where the management interface is ...

i want to allow a server on my Internal to communicate with a server on my dmz over a specific port (i.e 5555) and vice versa, from outside i can connect to the dmz server over https. here is my config, i have only replaced the ips with dumy ip's. i ...

Hi,Recently, I unable to configure the failover on bridge group in transparent mode . I have five interfaces .out of this only 3 is showing in the show run config .can you please confirm whether I can config failover on on of the data interfaces.I ha...

Hello Guys,                    Please, I need to create a static NAT in order to allow a specific host(source)  on internet (ex: 100.100.100.100) to connect a specific internal host (ex: 10.10.10.10) for a video-conference system.  My question is : h...