Network Security

Hi Guys,I have Pix 501 firewall and I'm just configuring the device for "Email Server" to allowing POP/SMTP but i have some questions please answer me to resolve the issue.Inside Interface Address: 132.147.162.14/255.255.0.0Outside Interface Address:...

hi all - below is my sanitized ASA 5510 config.  got an IPv6 T1 from at&t and im unable to pass any traffic from my LAN clients out.  any help appreciated.  thx-:ASA Version 8.2(2) !enable password PoBmYYxuAzCciKRA encryptedpasswd 2KFQnbNIdI.2KYOU en...

Hi guru's.I've cloned the configuration off one of my ASA5510's to another 5510 to use as a template for a new data center deploy. I have configured the new firewalls networks and rules, and of course changed the WAN IP config to its new setting.I wa...

Hi, I have an asa 5520 that works fine if you are using passive ftp and ftp inspection is on globally. It is not working for an active ftp session. I tried allowing all ports back to the external ip address of the internal client as a test and this d...

If I need to add 10-user SSL VPN licenses to an ASA in active-standby failover pair, Do I need to get separate license for each ASA in the failover pair (even if the standby ASA is rarely going to be terminating the SSL VPN users) to maintain failove...

dear allwhen im trying to manager ip from IDM it accepts the username and password but after that sending error like this.Failed to issue version request to sensor.with RGDS please answer ASAP

folksi've only realised that my aip-ssm only reports on traffic which is passed through the firewall aclmy requirement is that i log all attempted intrusions regardless of whether they are permitted through the firewall or notdoes anyone know if i ca...

Hi all;I recently have been configuring Cisco devices to be monitored on RSA EnVision 4.0 Service Pack 3.When i tried to add an IPS 7.0 (Cisco Intrusion Prevention System, Version 7.0(2)E4) i have this output.This are the commands to enable it.config...

Hi!On a new XP SP3 machine with Java 1.6.0.27, I can not add any IPS devices (AIP-SSM-20). I can log in on them with ssh or ASDM.I always get this error:"Error response from IME Server - IOException: Read Time Out. IME IME Server is not responding. P...

Hi,I am configuring a IPS sensor (NME-IPS-K9 module on a Cisco 2900 series router).In Cisco IPS Device Manager Configurations --> Policies --> IPS Policies you can assing IPS policies (LowRis, MediumRisk and HIGHRisk) to the virtusl Sensor under the ...

I am trying to get SCP to work from a Cisco switch to SolarWinds SCP Server.  I can see the user get authenticated but the switch reports "Permission Denied" when it tries to transfer the file.I have verified the version of IOS that I am on doesnt ha...