Network Security

Hi,I need to configure the edge switch port to keep serving non-Cisco IP phone on deploying NAC as OOB VGW. I appreciate your advise, but make sure 802.1x solution as the last option.ThanksMike

HiEmail Server is hosted at ISP, users outlook is configured with ISP SMTP and POP information. when the user sends email with more than 3 receipient address the email get stuck in users Email outbox. If the Email is composed with single receipient i...

I have the following in my deployment:Server --- ACE 4710 --- ASA 5520 -- Routerfrom the server I can ping the inside ASA.but can't ping outside ASA or inside Router.from the ASA I can ping Outside Router, Server, and The Virual IP Address of ACE.the...

I can get to the untrusted certificate on https....coming from my address 192.168.133.205..but i get deniedam i being denied by access list?..I dont see how since intital SSL begins..these are the log from the ASA---10.11.24.11 is the ip of one of th...

If I want to use a redundant interface for the LAN based failover it is a requirement that I must put a hub or switch between the two ASA devices? I am attaching a couple of recommened scenarios from Cisco -- one without a switch and one with a coupl...

I have an ASA 5510 that is setup in the following manner. Internet ----->  "outside" ASA interface ----> [ASA] -->  "private" ASA Interface -- 192.168.1.1/24 network --> Router --> 10.0.0.0 network I have a web server that sits on the 10.0.0.0/24 ne...

Hi I've got a cisco asa 5520 and I need some help setting up the NAT for multiple DMZs on it.I want to use PAT on the outside interface.internally ive created subinterfaces for the VLANs and connected to a trunk port on a switch.can you please advise...

I followed the document from Cisco (http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml#lanbas) and it seems I have a partial configured ASA in the active/standby.  Both ASA are identical except ...

I have a cisco asa 5510 which I am attempting initial setup.I have connected it to a cisco SG 100D-08  switch using the 5510's MGMT port.I have connected a laptop windows XP to the SG 100D-08 as well.I set the IP address of the laptop:192.168.1.2255....

Hi All, I make every week a backup that lasts more than two hours, one of the backup agents remains in idle state over time, to be a tcp connection timeout is set by default to 1 hour. I changed the configuration of the ASDM conn in Configuration-> ...

Hello,We have a setup where clients on the internal network send/receive their emails through Microsoft Outlook client, while the Exchange server is hosted on the internet, outside the organization.The clients are connected to a Cisco switch, behind ...