Network Security

hi guys,I have a ASA firewall running 2 context, i manage it using the ASDM.Could someone be able to point out to me, on how is it possible for me to back the configuration file?As on the ASDM the option of doing a backup is GREYED OUT.Please advise

we got sw ips on this router, how do we enable it?where do we get the signatures?is there any registration required?what is the best practice to configure the ips on the 881 router?

Hi,I do have the below setup,,1. I have 6509 switch2. I have 2 WLC configured in Active/Active mode connected in Trunk mode (L2 Port-Channel) connected with 6509 switch3. On switch side i have configured the port as Trunk4. L3 SVI for wireless users ...

Hello Dears,What i understand by Event Action Override is that the default action set with the signature will be overriden by the configuration we do in the event action override pane.For Example:IF a signature is built with a medium risk rating to o...

Hi everyone,I am having trouble to enable NAT it seems like on my FW. My son is trying to connect to Age of Empire Online and hes not able to. When I run the Microsoft Internet Connectivity Evaluation Tool and shows that NAT is not supported. I have ...

Hi,I configured a VPN Site to Site with an ASA 5570 ( Headquarter) and a router 881 ( Branch office) , LAN networks are 192.165.0.x and 10.213.21.x , the problem is that I don't have connectivity between these LAN networks only between peers however ...

Hi,I have an ASA 5520 with an AIP-SSM-10 module. When i try to connect to it using IDM, I have the following message " ERROR CONNECTING TO SENSOR. Failed to load Sensor -errsystemerror-ct-sensorapp420 not responding, please check system processes. Th...

HII have made a Nat Rule  to access local IP in outer world with external IP on asa 5505 . Before creating nat rule external IP was directly given to server but after that I put server behind ASA. But now external IP is not accessible externally...Pl...

Geting this message, having low performance and overrun errors Apr 29 13:45:59 pix-servidores %PIX-4-500004: Invalid transport field  for protocol=TCP, from 188.120.243.238/80 to 174.56.110.0/0I can't find any good answer for this.Does anybody knows ...

Hi,I have COSCO ASA5510 Firewall.I want to audit of my firewall for following regards. o IP directed broadcasts, unreachable & redirects are disallow o Incoming packets at the router sourced with invalid addresses such as RFC1918 address (in gateway ...