If I upgrade ASA code (from 8.3.2 to 8.4.1) on the primary 5540, will the secondary 5540 code automatically be upgraded? If so, is it through the failover link?
If I upgrade ASA code (from 8.3.2 to 8.4.1) on the primary 5540, will the secondary 5540 code automatically be upgraded? If so, is it through the failover link?
Hi,I'm taking the plunge with a client tommorrow on ASA 8.4(1) code (a new install, not an upgrade). and was wondering if anyone out there had any experiences, good or bad, to share about this revision?From the release notes, it seems to address over...
All, I am configuring some ASA5510s with AIP-SSM IPS cards, and would like to alert busy operators with an audible alert for events above some defined threshold. I don't see any built-in audible alert options in either IME or ASDM. Does anyone ...
Hi everybody,you can find here a schema and fw confs: https://supportforums.cisco.com/message/3289161I faced another problem related to the above infrastructure.I've added to fw BBB and CCC also the appropriate ACL for the TFTP server that's in the s...
Hi all,I am currently working on a migration of a pix 515E 6.3(3) to an ASA5510 running 8.3(1).On the pix I have this NAT config:global (outside) 1 interfacenat (inside) 0 access-list nonatThis nonat access-list has more than 200 entries.If I underst...
If i have configured snmpv3 on routers and i forgot the snmp authentication and other related security parameters is there a way to recover them , i think the running-config is not displaying them . or i have to reconfigure them ?
Dear All,I have doubt on host certificate:I have two AIP-SSM module shows different host certificate value though i have installed/configured both on same date.I am not very sure what this host certificate is.. could any1 help me to understand it.. a...
Hi everybody,I've attached an image in order to better explain the situation.Each one of the ASA5505 is connected to the ASA5510 via VPN (there's no connection between the two 5505).My PC (10.1.1.2) is on the INSIDE network of the FW AAA (ASA5510) an...
Good day!We have two cisco ASA in active-passive mode as firewall solution between Internet and LANASA connects by two links to Cisco 6506 (central LAN switch)We want to deploy DLP-solution on Websense DSS. And want to have possibility to block untru...
Dear Community,We are having 2 branch offices, which are connected by site-to-site VPN to the HQ.Those two BO's are going to change the provider..so new IP's.I will do the migration from remote.today:interface Ethernet0/0 nameif outside security-leve...
Hello, I am working on a issue with the ASA 8.3(1).The issue is i have VPN client users connecting to the outside interface. Once they connect they are given an ip range. Now once they connect the VPN there is another interface in the same ASA DMZ....
Hello,I am going to be implementing a Firewall VPN Solution which is behind another Firewall. The termination point will be the second firewall. In this kind of a scenario, what are some of the things that you need to configure, which is different fr...
Hi,Packet tracer works great verifying my site-to-site ipsec tunnel from inside, but when I run it from outside and give it an ip address that would have been classified as interesting on the peer device, it fails.This would not be return traffic, bu...
we have a network manager inside and a ris server outside of an asa5510 firewall running ios version asa823-k8.binWe have a rule on both the inside and outside interfaces allowing tftp through.When tftp is initiated from the Netmager on hte inside t...
Hi all,I've deployed successfully in L2 OOB VG mode with PCs plugged in behing IP phones, however everytime I connect the NAC to the network the Internet slows down and the phone quality degrades. What could be the cause of this? An ideas?Thanks,~Xav...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-16-2025 04:21 AM | ||
07-06-2025 01:40 PM | ||
07-04-2025 01:59 AM | ||
06-19-2025 07:32 AM | ||
06-17-2025 01:07 PM |
User | Count |
---|---|
8 | |
7 | |
7 | |
2 | |
1 |