Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
First, This is a new installation. All the SPA504G are working ok, I only have some problems with CIPC.All IP Phones are registering ok, and the voice quality is perfect.Sometimes my CIPC freezes when I try to make a call, do not respond the dialing ...
Hi guys, I have an ASA5510-BUN-K9 in this version:###Cisco Adaptive Security Appliance Software Version 8.0(3)6 Device Manager Version 6.0(2) Compiled on Thu 17-Jan-08 17:42 by buildersSystem image file is "disk0:/asa803-6-k8.bin"Hardware: ASA5510,...
SOLVEDI recently configured a CPTONE modified for analog lines connected to CANTV through FXO interfaces. The solution has proved successful disconnect supervision for incoming calls to the router's FXO ports on a Cisco ISR2911-V.STEP 1voice class cu...
Thanks Jonathan, this is for a branch office in other country , could i connect the new CTS1300 at that branch office trough VPN to the Main Office's CUCM for this solution?
Thanks Rob and Amer for your help,but anyone could tell me where in cisco pages I could find this statement? "that with SRST we dont need purchase phone device license in a CUCMBE based solution"
To capture, bring up the first FTP client session, then try to telnet from outside to port 21 on that server at the same time from the same machine, repeat after that from some other machine. I recommend you check Dynamic NAT table too.
