Network Security

Engage with peers and experts on network security topics such as Secure Firewall Threat Defense, Adaptive Security Appliance, Secure Firewall Management Center, and Security Cloud Control.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

I am having issues resolving dns and I am thinking it is my nat configuration.I have a cisco asa 5510 with these settingsOutside / inside / dmz1 / dmz2On my outside iface i have an ip of 192.168.1.### <--- this ip address goes to the ISAinside iface ...

Hello Guys, I ´ve tried to add CAS server into a CAM but I got an error that saysFailed to add server: Maximum limit for Clean Access  Servers supported has been reachedbut the CAM has a super manager License present along with a Manager Failover Lic...

OK .. I am have an odd issue I am unable to figure out. I have a new ASA 5520 that we implemented last week. I have the standard inside, DMZ, outside interfaces set at security levels of 100, 40 and 0 respectively. I have an ACL for inside traffice a...

bberry by Level 1
  • 2253 Views
  • 12 replies
  • 0 Helpful votes

1St configring Nac Ldap integrate with active derctoryi need steps in active directory to confuiger Ldap and integrate with active directorythanksahmed

I have a 2811 router with an IOS Firewall and I'm trying to enable smtp through. I've added smtp to the access lists but no joy. I even disabled the access lists and applied one with permit tcp any any and still no joy. I'm suspecting the ip inspect ...

hi halijenn / experts106007 Deny Inbound UDP from 63.131.5.11/32411 to 63.131.64.142/53 due to DNS Query This is the error which customer is getting when he is having Public DNS Server inside the organization .Following static and ACL configured for ...

Hello,Apologies if this has been covered before, I did a quick scan of forums here but might have missed a relevant post.  I am dealing with a 'base license' Cisco 5505 ASA 8.0(2) using ASDM 6.0(2).  I've noticed that normal background network traffi...

Hello,Someone on the IDS group suggested I post this here instead.  Apologies if this has been covered before, I did a quick scan of forums here only found one relevant post, which didn't help in my case...I am dealing with a 'base license' Cisco 550...

we have 3 networks. Outside(172.14.XX.XX), Inside(172.20.XX.XX) and Local (INTF2 192.168.XX.XX) , inside outside network is working fine , but when we tryed to access the INTF2 Network we are getting Pormap Cration Errors. We are using ASA 5510 with ...

rsjavahar by Level 1
  • 1138 Views
  • 4 replies
  • 0 Helpful votes

Hi,is there a way to stop CBAC from sending RST Packets for half-open connections that time out? I would prefer to drop this sessions silently. This behaviour interferes with one of our Riverbed machines. Any suggestions?Andre

a.janssen by Level 1
  • 1133 Views
  • 1 replies
  • 0 Helpful votes

Hi guys, I'm not very familiar with the ASA 5505; on a base license, would the following configuration work? Can it act as an edge device for two ISP networks? /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tsty...

changjoe by Level 1
  • 6384 Views
  • 4 replies
  • 0 Helpful votes

Hi Experts, I am on NAC implementation project.Regarding Cisco NAC implementation I have some question, I hope for your valuable inputs. Scenario (regarding dynamic vlans) We have 4 floors and 4 departments. In design every department has different v...