Network Security

We use the VPN Client 1.1 to PIX 520. We can connect & authenticate. I am not able to browse my network (10.2.0.0). I cannot map a drive or share on any servers. I can however using the IP address of the mail server (10.2.0.60) receives mail in Outlo...

Can the client also be terminates on a Cisco IOS? Can some put a simple example config?Felix

Hi I would like to implement 2-3 Module of IDS on cat6kand each IDS module will be used to monitor a Gigabit connection going to the PIX .How many IDS on a cat 6k ? maximum ?Management of PIX and IDS should be done from Cworks 2000 security managemen...

i have a pix that will allow voice to get thru when using PATTALK but will block voice from MSN. Is there a command that will allow it.Thanks.

Hi,anyone can confirm that PIX 515 support for Load Balancing... so there ada two default route to the different gateway ip address ??thanks

Has anyone been able to get a PIX to use W2K's Radius Server?

Question, We’ve all heard talk in this discussion group about bidding farewell to conduits and adopting access lists for PIX version 6.0 and the PIX Device Manager (PDM). The question churning in my brain is, what happens if I just put version 6.0 on...

Dear all,I have a PIX535 failover system with PIX software version 5.3. Now I want to use PDM, so I must upgrade PIX image and load PDM image.How can I do this?Thanks in advance,Best Regards,Willy Seo

Please help me to provide an example of configuration to allow SIP with SDP information traversing the PIX Firewall.According to the PIX Release Note version 6, SIP support is enhanced to read the IP address and port number in SIP messages body, but ...

Hi folks,Lately, i notice netscreen offering greatest threat to PIX. Any comment?

I have a PIX 506 for my Internet firewall and also a Cisco 1600 to connect a remote office to the corporate LAN. In order for the corporate users to see the remote LAN, I have to set their defualt gateway to the 1600 router. Then on the 1600 router I...

Is it possible to configure and manage a PIX Firewall thru modem. Can it be managed thru the outside Interface ?

If i understood this correctly from cisco documentation, pix can be accessed remotely via http as a part of new pdm feature.Isn't it, http, unsecure? How can i secure that connection? any thoughts?

Hello, My question is based on this scenario. I have a 1720 router with a Web server attached in the DMZ. I need to allow that Web server to access a database on the inside of a PIX 506 firewall. Is there a way to open a connection between the Web se...

Just curious to know if anyone has installed PIX 6.0(1) yet, and if there are any issues/problems/concerns with it at this early date...???Rob