03-23-2008 11:34 AM - edited 02-21-2020 01:56 AM
Hi,
We have implemented NAC L3 OOB mode in our campus, we are facing issues with NAC now.
Some of the ports in the switches are getting administratively shutdown by CAM automatically.
Also in the CAM the following errors are found in the log files..
Logs from â/perfigo/logs/perfigo-log0.log.0 â are as follows
Mar 23, 2008 4:23:06 PM com.perfigo.wlan.web.sms.SnmpManager switchToVlan
SEVERE: Failed to change the VLAN to17 on switch [10.0.99.13] port [10113]: No SNMP response [1.3.6.1.4.1.9.9.68.1.2.2.1.2.10113].
Mar 23, 2008 4:23:06 PM com.perfigo.wlan.web.sms.SnmpManager takeCertifiedAction
SEVERE: Unable to set port 10113 to Access VLAN 17 on switch [10.0.99.13] for 00:E0:7D:8A:29:24.
Mar 23, 2008 4:23:16 PM com.perfigo.wlan.web.sms.SnmpManager switchToVlan
SEVERE: Failed to change the VLAN to17 on switch [10.0.99.13] port [10116]: No SNMP response [1.3.6.1.4.1.9.9.68.1.2.2.1.2.10116].
Mar 23, 2008 4:23:16 PM com.perfigo.wlan.web.sms.SnmpManager takeCertifiedAction
SEVERE: Unable to set port 10116 to Access VLAN 17 on switch [10.0.99.13] for 00:1A:A0:B3:2F:B2.
Logs from â/perfigo/logsperfigo-log0.log.1â are as follows
Mar 23, 2008 3:43:54 PM com.perfigo.wlan.web.sms.SnmpManager switchToVlan
SEVERE: Failed to change the VLAN to17 on switch [10.0.99.13] port [10116]: No SNMP response [1.3.6.1.4.1.9.9.68.1.2.2.1.2.10116].
Mar 23, 2008 3:43:54 PM com.perfigo.wlan.web.sms.SnmpManager takeCertifiedAction
SEVERE: Unable to set port 10116 to Access VLAN 17 on switch [10.0.99.13] for 00:1A:A0:B3:2F:B2.
Mar 23, 2008 3:44:04 PM com.perfigo.wlan.web.sms.SnmpManager switchToVlan
SEVERE: Failed to change the VLAN to17 on switch [10.0.99.13] port [10113]: No SNMP response [1.3.6.1.4.1.9.9.68.1.2.2.1.2.10113].
The CAM & CAS are running version 4.1.3, the switches (cisco 3560 & 3750) are running IOS 12.2.40
Can somebody give your inputs to solve this problem...
Regards
Vijay
03-24-2008 04:56 AM
Are the switches set up for SNMP control on the CAM? Also check the switch config. Try debug snmp pack to ensure that the CAM is sending SNMP traps correctly.
03-24-2008 06:47 AM
Yes, its done. These switches were working fine for few days, the problem started all of a sudden only y'day. There were no other changes done in the network too..
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide