10-22-2012 08:13 PM - edited 03-11-2019 05:12 PM
Hi all :
My client is asking can the Cisco ASA 5505 implement MAC ACL in Cisco ASA 5505 which is now running in Router Mode.
Can anybody help to answer this?
I have tried to search the document and also tried the ASDM in the Cisco ASA 5505 but could not see any way to do the ACL by MAC address.
At the same time can also help me find out that by using command line the ASA 5505 able to run MAC ACL in router mode?
Many thanks!
Warmest regards,
TangSuan Tan
Solved! Go to Solution.
10-22-2012 08:50 PM
MAC ACL is not supported on Routed mode, only in Transparent mode.
Here is the command for your reference:
http://www.cisco.com/en/US/docs/security/asa/asa84/command/reference/a1.html#wp1598101
And here is the supported ethertype:
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/access_rules.html#wp1083699
10-22-2012 08:50 PM
MAC ACL is not supported on Routed mode, only in Transparent mode.
Here is the command for your reference:
http://www.cisco.com/en/US/docs/security/asa/asa84/command/reference/a1.html#wp1598101
And here is the supported ethertype:
http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/access_rules.html#wp1083699
10-22-2012 09:18 PM
Hi Jennifer :
Thanks to your reply.
Your answer really help me to confirm my understanding.
Warmest regards,
TangSuan Tan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide