11-01-2018 11:07 AM - edited 02-21-2020 08:25 AM
This is my first Cisco setup. Local workstations get ip address but cannot get out to the internet. Can someone look over my running config?
Building configuration... Current configuration : 4318 bytes ! ! Last configuration change at 12:29:28 Chicago Thu Nov 1 2018 by admin ! version 15.5 service timestamps debug datetime msec service timestamps log datetime msec no platform punt-keepalive disable-kernel-core ! hostname cisco4321 ! boot-start-marker boot-end-marker ! ! vrf definition Mgmt-intf ! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family ! enable secret 5 ***************** enable password ****** ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! ! ! ! ! aaa session-id common no process cpu autoprofile hog clock timezone Chicago -6 0 clock summer-time Chicago date Apr 6 2003 2:00 Oct 26 2003 2:00 ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! subscriber templating ! multilink bundle-name authenticated ! ! ! crypto pki trustpoint TP-self-signed-1724128401 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-1724128401 revocation-check none rsakeypair TP-self-signed-1724128401 ! ! crypto pki certificate chain TP-self-signed-1724128401 certificate self-signed 01 ************************************************************************************ quit license udi pid ************************* ! spanning-tree extend system-id ! username admin privilege 15 password 0 ****** username craig privilege 15 secret ***************** ! redundancy mode none ! ! ! ! ! vlan internal allocation policy ascending no cdp run ! ! class-map type inspect match-any WEBSERVER match protocol http match protocol https match protocol ftp match protocol ftps class-map type inspect match-all ccp-cls--1 match class-map WEBSERVER match access-group name SYNOLOGY ! policy-map type inspect ccp-policy-ccp-cls--1 class type inspect ccp-cls--1 pass class class-default ! zone security INSIDE zone security Outside zone-pair security sdm-zp-Outside-INSIDE source Outside destination INSIDE service-policy type inspect ccp-policy-ccp-cls--1 ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface GigabitEthernet0/0/0 description $ETH-WAN$ ip address 184.184.206.207 255.255.255.240 ip nat outside zone-member security Outside media-type rj45 negotiation auto ! interface GigabitEthernet0/0/1 ip address 192.168.2.1 255.255.255.0 ip nat inside zone-member security INSIDE negotiation auto ! interface GigabitEthernet0 description $ETH-LAN$ vrf forwarding Mgmt-intf ip address 192.168.1.1 255.255.255.0 negotiation auto no cdp enable ! interface Vlan1 no ip address shutdown ! ip nat inside source list 1 interface GigabitEthernet0/0/0 overload ip forward-protocol nd ip http server ip http authentication local ip http secure-server ip tftp source-interface GigabitEthernet0 ! ! ip access-list extended SYNOLOGY remark CCP_ACL Category=128 permit ip host 192.168.2.20 any ! access-list 1 remark CCP_ACL Category=2 access-list 1 permit 192.168.2.0 0.0.0.255 ! snmp-server community public RO ! ! ! ! control-plane ! ! line con 0 exec-timeout 0 0 stopbits 1 line aux 0 stopbits 1 line vty 0 4 password ****** ! ! end
11-01-2018 11:59 AM
11-02-2018 05:36 AM
your default route to an IP address on the outside is missing
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide