01-24-2016 04:34 PM - edited 03-12-2019 12:11 AM
Hi Experts,
I need to get some insight on this issue as when I try to configure an interface with a IP address and save it..! IT DOES NOT SAVE?
What seems to be the problem. This problem started from the time a reset the device to factory default and when the default password got reset now I am faced with the problem where configs don't get saved either via write or copy configs command ?
I need your expertise here...! Below is the details acquired from the device:
Cisco Adaptive Security Appliance Software Version 8.2(1) <system>
Device Manager Version 6.2(1)
Compiled on Tue 05-May-09 22:45 by builders
System image file is "disk0:/asa821-k8.bin"
Config file at boot was "startup-config"
CISCOASA up 1 hour 24 mins
Hardware: ASA5540, 2048 MB RAM, CPU Pentium 4 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-55x0 on-board accelerator (revision 0x0)
Boot microcode : CN1000-MC-BOOT-2.00
SSL/IKE microcode: CNLite-MC-SSLm-PLUS-2.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
0: Ext: GigabitEthernet0/0 : address is 442b.03a6.47b0, irq 9
1: Ext: GigabitEthernet0/1 : address is 442b.03a6.47b1, irq 9
2: Ext: GigabitEthernet0/2 : address is 442b.03a6.47b2, irq 9
3: Ext: GigabitEthernet0/3 : address is 442b.03a6.47b3, irq 9
4: Ext: Management0/0 : address is 442b.03a6.47b4, irq 11
5: Int: Internal-Data0/0 : address is 0000.0001.0002, irq 11
6: Int: Internal-Control0/0 : address is 0000.0001.0001, irq 5
01-25-2016 01:04 AM
Hi,
Can you share the command line output after executing the "write mem" command?
Also could you provide the show flash output?
Thanks,
Shivapramod M
01-25-2016 03:31 PM
Hi,
Please view as requested;
CISCOASA# show firewall
Firewall mode: Router
CISCOASA# show context
Context Name Class Interfaces URL
*admin default GigabitEthernet0/0, disk0:/admin.cfg
GigabitEthernet0/1,
GigabitEthernet0/2,
Management0/0
Total active Security Contexts: 1
CISCOASA# show flash
--#-- --length-- -----date/time------ path
164 16275456 Oct 15 2010 10:02:08 asa821-k8.bin
165 11348300 Oct 15 2010 12:21:32 asdm-621.bin
166 4096 Jan 01 1980 00:00:00 FSCK0000.REC
3 4096 Jul 18 2013 04:11:36 log
191 1820 Jul 18 2013 04:11:36 log/recovery-event.202.20130718.041136
12 4096 Jan 01 2003 00:03:32 crypto_archive
13 4096 Jan 01 2003 00:04:04 coredumpinfo
14 43 Oct 02 2014 02:12:04 coredumpinfo/coredump.cfg
168 4096 Jan 01 1980 00:00:00 FSCK0001.REC
169 12105313 Oct 15 2010 12:17:58 csd_3.5.841-k9.pkg
170 4096 Oct 15 2010 12:18:02 sdesktop
193 1462 Oct 15 2010 12:18:02 sdesktop/data.xml
171 2857568 Oct 15 2010 12:18:04 anyconnect-wince-ARMv4I-2.4.1012-k9.pkg
172 3203909 Oct 15 2010 12:18:04 anyconnect-win-2.4.1012-k9.pkg
173 4832344 Oct 15 2010 12:18:08 anyconnect-macosx-i386-2.4.1012-k9.pkg
174 5209423 Oct 15 2010 12:18:10 anyconnect-linux-2.4.1012-k9.pkg
175 4096 Jan 01 1980 00:00:00 FSCK0002.REC
176 24576 Jan 01 1980 00:00:00 FSCK0003.REC
177 4096 Jan 01 1980 00:00:00 FSCK0004.REC
178 28672 Jan 01 1980 00:00:00 FSCK0005.REC
179 4096 Jan 01 1980 00:00:00 FSCK0006.REC
180 24576 Jan 01 1980 00:00:00 FSCK0007.REC
181 4096 Jan 01 1980 00:00:00 FSCK0008.REC
182 28672 Jan 01 1980 00:00:00 FSCK0009.REC
183 4096 Jan 01 1980 00:00:00 FSCK0010.REC
184 20480 Jan 01 1980 00:00:00 FSCK0011.REC
185 4096 Jan 01 1980 00:00:00 FSCK0012.REC
186 16384 Jan 01 1980 00:00:00 FSCK0013.REC
187 4096 Jan 01 1980 00:00:00 FSCK0014.REC
188 2724 Oct 02 2014 02:12:04 old_running.cfg
189 2170 Oct 02 2014 02:12:04 admin.cfg
255582208 bytes total (196374528 bytes free)
01-26-2016 06:57 AM
This query is already answered here
https://supportforums.cisco.com/discussion/12757826/asa-5540-config-issue
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide