Cisco ASA 5545X **CPU** Temperature threshold

[paul.cummings.uk]

Hi,

I'd like to know what the built in threshold is for the CPU Temperature (not the ambient temperature) where the "show environment" command will start showing a warning or critical value. The reason for this is so that I can use the value on our monitoring system which is polling the values via SNMP. I can clearly see the ambient operating temperatures in the ASA product documentation but no-where does it define the normal operating ranges for the CPUs. In particular I'd like to know this information for 5515x, 5525x and 5545x models please.

Thanks

Paul 

[Dennis Perto]

With SNMP you should alert on the data relevant to your setup. If 40 degrees is unusual, then you should alert on that. :)
If you need some information about the hardware in the ASA, then you could see this post that I made, and then look up the numbers on Intel's website. 

https://communities.cisco.com/community/technology/security/ngfw-firewalls/blog/2016/02/02/asa-hardware-facts-sheet