HI Guys,
I have attached my network design. we have 2 DC( Active/stnaby) and both having different subnets.
I have concern about failover and interface configuration. as these are in the different subnet what should be the interface IP address?
can you please review the diagram and provide me your inputs..I have taken 10.1.1.0/24 for primary Firewall and 10.1.2.0/24 for standby firewall.
these subnet should be of inside interfaces.
For outside we can take 20.1.1.0/24 and 20.1.2.0/24.
Thanks for inputs.