Cisco Firepower 2110 with ASA HA image - Swapping the LAN failover unit configuration from "primary" to "secondary" on the ASA originally configured as primary

[GiovanniStavale53399]

Hi! for testing purposes, I have reloaded the active ASA. It worked, but when I saw the running configuration from Primary unit, the configuration of the "LAN failover unit" changed from primary to secondary. Is this behavior normal?

[balaji.bandi · Accepted solution]

yes correct when the Primary come online after reboot it will be secondary, while you reboot seconday before primary (active)

[GiovanniStavale53399]

Thank you very much for your attention Mr.Balaji!

Best regards