Cisco FTD 4140 not able to register with Firepower Management 6.1

[Pranav Gade]

Hi All,

We are having Cisco FRP 4140 box with FTD image 6.0.1, can any one help me how to register Cisco 4140 box to Firepower Management ?

Can anybody tell me step by step procedure with commands in FRP 4140 side?

Thanks in Advance

[Oliver Kaiser · Accepted solution]

You have so assign an ip address to your mgmt interface and configure the fmc connection with a registration-key matching on both ends

e.g.

> configure network ipv4 manual <ftd-management-ip> <subnetmask> <default-gateway>

> configure manager add <fmc-ip-address> <registratation-key>

You may check registration status using the following command:

> show managers