11-12-2010 12:08 AM - edited 03-11-2019 12:08 PM
Hello folks,
I have configured the Cisco IOS firewalling feature with some inspect rules on a Cisco851 ISR Router. Everything works fine so far.
Now, I need to do some port-maps for applications not known by the router. But strange, the router does not know the command "ip port-map...."!
On the Cisco feature navogator I can see, that the router supports port-map (PAM) feature.
Does anybody know the issue or the solution for that?
The router is running the software (C850-ADVSECURITYK9-M), Version 12.4(15)T14.
Output from Cisco feature navigator:
Best regards,
Volker
11-12-2010 12:13 AM
11-12-2010 12:33 AM
Hi Hassan,
thx for reply...
but I know how to configure the feature. The issue is that it is not possible to execute the ip port-map command because it is not known by the router.
Regards
Volker
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide