Hello folks,I have configured the Cisco IOS firewalling feature with some inspect rules on a Cisco851 ISR Router. Everything works fine so far.Now, I need to do some port-maps for applications not known by the router. But strange, the router does not...
Hello,has anybody a configuration example or some hints for configuring two WAE and one CM connected to the ASA inside interface. The ASAs have an IPSec VPN Tunnel connection to their outside interfaces. Is it possible to configure promiscuous mode o...
Hello,we have installed a CSC Content Security Module in an ASA5510. Software Version is ASA 8.0(3) and 6.2.1599.3. We have some trouble with ftp file scanning. If we use for example FileZilla and upload a file there is always a timeout and the file ...
i have a wism installed in a c6509. everything seems to work fine. in the wlan options i have configured allow aaa override, so the acs ver3 can override the session timeout from the controller, which is 1800. but when the timeout comes the client wi...
Hello,I have configured two 1240 APs in bridging mode. One root and the other nonroot. Configured with WPA2 and LEAP with local RADIUS. Reauthentication interval is 120 sec. Everything works fine but when the nonrootbridge has to reauthenticate, it l...
Hi Daniel,I have exactly the same issue that you have described. Did you solve the issue and how did you do that? I'm thinking that perhaps a software update might help, but I can't find any bugs matching the behaviour of the switch module.Best regar...
Hi Hassan,thx for reply...but I know how to configure the feature. The issue is that it is not possible to execute the ip port-map command because it is not known by the router.RegardsVolker
