10-03-2019 09:58 AM
Hi
when i try to make a password recovery i use the command confreg but i omit to put 0x2102 and now im able to boot login to the ASA but the startup-config is not loading the config. here is the MSG: Ignoring startup configuration as instructed by configuration register. I'm not able to boot in ROMMON by hitting ESC like i've done before. It was working beofre and now i don't why but I'm stuck.
Rebooting...
Rom image verified correctly
Cisco Systems ROMMON, Version 1.1.8, RELEASE SOFTWARE
Copyright (c) 1994-2015 by Cisco Systems, Inc.
Compiled Thu 06/18/2015 12:15:56.43 by builders
Current image running: Boot ROM0
Last reset cause: PowerCycleRequest
DIMM Slot 0 : Present
Platform ASA5506 with 4096 Mbytes of main memory
MAC Address: 70:db:98:f3:a0:7b
Located '.boot_string' @ cluster 291981.
#
Attempt autoboot: "boot disk0:/os.img"
Located 'os.img' @ cluster 257862.
###################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################
LFBFF signature verified.
INIT: version 2.88 booting
Starting udev
Configuring network interfaces... done.
Populating dev cache
Detected PID ASA5506.
Found device serial number XXXXXXXXX
Found USB flash drive /dev/sdb
Found hard drive(s): /dev/sda
fsck from util-linux 2.23.2
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
There are differences between boot sector and its backup.
Differences: (offset:original/backup)
65:01/00
Not automatically fixing this.
/dev/sdb1: 49 files, 26169/1919063 clusters
==============================================
Use ESC to interrupt boot and launch boot CLI.
Use SPACE to launch Cisco FTD immediately.
Cisco FTD launch in 26 seconds ...
Thanks for all your help
Solved! Go to Solution.
10-03-2019 12:15 PM
It looks like you are using ASA 5506 that is running FTD (Firepower Threat Defense). Thus, the only way to perform a password-recovery is through a software re-image:
https://www.cisco.com/c/en/us/td/docs/security/firepower/quick_start/reimage/asa-ftd-reimage.html
I hope this helps!
Thank you for rating helpful posts!
10-03-2019 12:15 PM
It looks like you are using ASA 5506 that is running FTD (Firepower Threat Defense). Thus, the only way to perform a password-recovery is through a software re-image:
https://www.cisco.com/c/en/us/td/docs/security/firepower/quick_start/reimage/asa-ftd-reimage.html
I hope this helps!
Thank you for rating helpful posts!
10-04-2019 09:54 AM
Hi,
Yes I saw that but now I'm stuck.
In fact I enter confreg without option like this:
rommon1> confreg
rommon2>
and now I'm stuck with that mode cause for some reason I'm not able to use again the ESC or send a BREAK signal in putty or HyperTerminal.
That's my issue.
Thanks you,
Thanks
Do you think the re-imaging will get me out of that mode of confreg?
Thanks.
10-04-2019 10:12 AM
Yes, follow the steps in the guide in the link that I posted above. You perform the re-image form rommon.
Thank you for rating helpful posts!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide