Configuring Range in Network Object with ASA 5505
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-07-2013 02:53 PM - edited 03-11-2019 08:02 PM
Hi Team
I have a firewall ASA 5505, with the version 8.2 and ADSM 6.4, i need configure range in network object, but only appears the IP address option and not more options. I send the print screen. I need update the version of ASA and ADSM?
Thank you.
Regards
- Labels:
-
NGFW Firewalls
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-07-2013 02:58 PM
Hi,
The configuration "object network
The 8.2 and older softwares only have "object-group network
The "object network
The "object-group network
So to my understanding there is no real option to specify a range of IP addresses in your software.
Option would be use to use multiple IP addresses under the same "object-group" or configuration small subnets under the "object-group" that match the address range needed.
- Jouni
