Network Security

Engage with peers and experts on network security topics such as FTD, FMC, FDM, CDO and ASA.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Join

 
Labels

Forum Posts

Ok, I am in a pickle here. The security requirments for my Cisco firepower 2140 require a pre-login banner to be posted. As far as I can tell there is not place within the FDM to configure a banner, and when I do it via cli I get the error telling me...

Hi !I'm start learning FTD (FP1010) and trying to figure out why I can't see external blocked SYN packets on FDM web interface (Events Tab). They are visible only on syslog messages, like this example: 07-07-2025 10:29:14 Local4.Error 192.168.0.1 Jul...

Otvforte_0-1751895849037.png
Otvforte by Community Member
  • 107 Views
  • 5 replies
  • 0 Helpful votes

Hello We just got a cisco FIREWALL FPR3105-NGFW-K9 and very exited but we have failed to get the an ip address through DHCP even after connection to he INSIDE PORT. As a mater of fact the port is not lighting at all but the out side port is lighting ...

Tech12 by Community Member
  • 86 Views
  • 4 replies
  • 0 Helpful votes

Hi to all ,i am getting many messages as the following:Severity: criticalModule: Talos CommunicationDescription: 3 modules failed:* URLDB- Failed to retrieve beaker inventory* LSP- Failed to retrieve beaker inventoryMy subscription is active (it expi...

Ditter by Level 4
  • 10206 Views
  • 44 replies
  • 2 Helpful votes

I currently have 2 sites, and each site has (2) FTDs in active/passive failover. When looking at the Platform Settings, they both share a single policy. I need to add another policy for each pair to change their syslog server settings to go to differ...

jberrios by Level 1
  • 578 Views
  • 7 replies
  • 1 Helpful votes

I have setup up a number of FTDS that are managed by FMC in CML labs. I have setup the in-built desktop in CML that is hanging off a FTD. I am able to get the internet via FTD-->Router (NAT)-->External Connector and I am able to get internet access f...

IPNINJA by Level 1
  • 404 Views
  • 9 replies
  • 0 Helpful votes

Resolved! FTD bandwidth

Hello, I have a customer with two FTD 1010 in HA managed with CDO (no FMC). Previously we were on the ASA platform and, with a little tool called FirePlotter, we saw the bandwidth usage in real time. The tool provided in CDO or FDM are not enough acc...

lvivier by Level 1
  • 191 Views
  • 2 replies
  • 1 Helpful votes
Review Cisco Networking for a $25 gift card