09-23-2002 06:57 AM - edited 02-20-2020 10:15 PM
Hi,
the cwsi-start failes with the message: "could not reconnect to osagent". The Installation contains the following Software: WindowsNT4-Server (SP6a), HP Network-Node-Manager 6.2, RME2.2 / CWSI 2.4. The information from osfind.exe is: osagent works on port 14000. But the default port should be 42342. I had no success with the change of the registry-values from 42342 to 14000.
What can I do?
Regards.
Volker Janusch
09-24-2002 05:27 PM
Try doing a reinit to the CWSI db to see if it works. As a side note, the version that you're using RME 2.2/CWSI 2.4 is almost obsolete considering that RME 3.4, Campus 3.2 is the latest.
09-25-2002 05:19 AM
yesterday did I reinitdb. But there was the same failure again. Now I restarted the deamon manager - and the CWSI works. After an reboot occures the same failure again. If I restrart the deamon manager: It works. I will put in operation again this customer-server with this workaround. If you have any other ideas ..... :-))
I know, this an obsolete Version, but the customer don`t want to upgrade at this time.
Thanks.
09-25-2002 09:25 AM
You can try doing a re-install to see if it helps.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide