05-21-2011 12:31 PM - edited 03-11-2019 01:36 PM
Just wondering if there are any methods or commands, natively, in the asa5510
for determing all traffic in to and from a certain server passing through the asa. This would be without a syslog server or something similar.
05-21-2011 11:51 PM
Hi,
Well for checking the traffic to and from the ASA, for a particular server would be a bit difficult without a syslog server, but on the ASA you have these options:
show conn | in
logging on
logging buffered 7
show logg | in
After some time you would have top clear the ASA buffer by:
clear logg buffer
You can also monitor the traffic from ASDM, that would be simpler.
Thanks,
Varun
05-24-2011 09:46 AM
Yes thanks. isn't there a way i can specify the size of the logging buffer. So i wouldn't need to remember
about having to periodically clear the buffer. something equal to say a week at a
time.
05-24-2011 11:15 AM
Hi,
yes you can specify the size of logging buffer by the command "logging buffer-size
The default size of the buffer is 4KB only.
Hope this helps.
Thanks,
Varun
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide