Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am wanting to know if the 3504 WLC will work with the 9120 AP and the 3700 AP. According to this - cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn810mr4.html It appears that it will. Just curious because i know the age of the 3...
I have a 9800 WLC with flexconnect enabled with a number of AP's associated. I am wanting to test the AP upgrade feature to see if it will allow for scheduled or at least staggered updates. Reason is the WLC will serve as a head end for remote site...
I have a number of asa acl's that need to be updated on a periodic basis. They are all updated in a similar manner but just have three variables that change for each entry. I would like to have a method to automate this. What i'm wondering if can ...
I have a c3750 switch stack that has a voice vlan and will support voip phones. It is a converged voip where the pc's link to the phones and the phones to the switch. It is a hosted voip solution where the sip server is not on the local lan - but ...
I have a c3750 switch that connect to a utm firewall on one if it's ports. I need to trunk that port so that it will carry the voice vlan. If i configure the port as a trunk port with below configuration during the day, will that cause any signific...
Nov 19 08:59:04.207: %IP-4-DUPADDR: Duplicate address x.x.x.18 on GigabitEthernet0/0, sourced by xxxx.xxxx.f5a4 . F584 is the other isr. The topology has the 7000 and other isr’s public in parallel linked to a switch and all behind an asa. The 700...
It's just sort of a matter of who to believe. Leaning on believing cisco but i was just wondering what throughput's people are actually getting in production. Main features we'd be running on this level of unit would be ips/ids and anyconnect or si...
We have a sizing chart(a spreadsheet) from our reseller which states that the 5506 with ips will reduce throughput to 68mb which is why i was asking. Does this sound accurate?
Yes. What i am saying is i have one isr(for instance) and i am wanting to send syslog output from that one isr to two differenct syslog servers. I believe what you stated above will address that. Thank you
