cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1114
Views
0
Helpful
1
Replies
vishaw jasrotia
Beginner

Enablin IPS on CISCO 2911

Hey all ,

I enable the IPS  on the 2911 router .  I am using the Basic IPS signatures that are inbulid on the routers .

But sill it showing , that no signature is active .

ip ips signature-category

  category all

      retired true

ip ips signature-category

   category ios_ips basic

      retired false

mkdir flash0:ips

ip ips name test

ip ips config location flash0:ips

int gi0/0

ip  ips test in

Above is the configuration :

KIndly suggest is there something more to done or m doing somthing wrong .

1 REPLY 1
Luis Silva Benavides
Cisco Employee

Hi Vishaw,

Did you copy the IOS-SXXX-CLI.pkg signature file from flash to idconfig?

This might be the part you are missing because the configuration looks fine.

See step 5

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6634/prod_white_paper0900aecd805c4ea8.html

Luis

Luis Silva
Create
Recognize Your Peers
Content for Community-Ad