cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2993
Views
0
Helpful
2
Replies

%ERROR% - Did not find Octeon. Read failure!

Hello, I have a problem to boot this ASA5506, got errors that not sure how to fix this, any idea??

Cisco Systems ROMMON, Version 1.1.8, RELEASE SOFTWARE
Copyright (c) 1994-2015  by Cisco Systems, Inc.
Compiled Thu 06/18/2015 12:15:56.43 by builders

Current image running: Boot ROM0
Last reset cause: PowerOn
DIMM Slot 0 : Present

%ERROR% - Did not find Octeon. Read failure!
%WARNING% - Failed to detect critical PCI devices.

Platform ASA5506 with 4096 Mbytes of main memory
MAC Address: 00:f2:8b:da:6c:c4

Use BREAK or ESC to interrupt boot.
Use SPACE to begin boot immediately.
                  
Located '.boot_string' @ cluster 795765.
#
Attempt autoboot: "boot disk0:/asa952-10-lfbff-k8.SPA"
Located 'asa952-10-lfbff-k8.SPA' @ cluster 837487.

#######################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################
LFBFF signature verified.
INIT: version 2.88 booting
Starting udev
Configuring network interfaces... done.
Populating dev cache
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
There are differences between boot sector and its backup.
Differences: (offset:original/backup)
  65:01/00
  Not automatically fixing this.
Starting check/repair pass.
Starting verification pass.
/dev/sdb1: 112 files, 824440/1918808 clusters
dosfsck(/dev/sdb1) returned 0
IO Memory Nodes: 1
IO Memory Per Node: 205520896 bytes

Global Reserve Memory Per Node: 314572800 bytes Nodes=1

LCMB: got 205520896 bytes on numa-id=0, phys=0x10e000000, virt=0x2aaaab000000
LCMB: HEAP-CACHE POOL got 314572800 bytes on numa-id=0, virt=0x7f30b9a00000
Processor memory:   1501037252

Compiled on Wed 25-May-16 17:38 PDT by builders
Panic: Init Thread - pci_platform_probe_kenton: Missing data ports
(set_exptime) Timer not a leaf 0x00007f30d5b97190. Traceback: 0x00007f30d22a440e 0x00007f30d229b64c 0x00007f30d22ab0cb 0x00007f30d22a5e33 0x00007f30d38127bf 0x00007f30d09f0180 0x00007f30d229e413 0x00007f30d458f1f2 0x00007f30d3806ee0 0x00007f30d229c5f5 0x00007f30d3816879 0x00007f30d227b8f9 0x00007f30cde6ee05
mgd_timer_set_exptime: Not a leaf called from 0x00007f30d22ab0cb
core0 same core snap_count=1 signo=11 RIP=7f30d22ab105

-----------------------------------------------
Traceback output aborted.
Flushing first exception frame:
        r8 0x0000000000008802
        r9 0x0000000000000000
       r10 0x00007ffe18e667f0
       r11 0x0000000000003206
       r12 0x00007f30d51d6e54
       r13 0x00007f30d61d9f10
       r14 0x0000000000000003
       r15 0x0000000000000002
       rdi 0x00000000000006a0
       rsi 0x0000000000000006
       rbp 0x00007ffe18e66a70
       rbx 0x00007ffe18e66ab0
       rdx 0x00000000000006a0
       rax 0x0000000000000000
       rcx 0xffffffffffffffff
       rsp 0x00007ffe18e66a28
       rip 0x00007f30cde82567
    eflags 0x0000000000003206
    csgsfs 0x0000000000000033
error code n/a
    vector 0x0000000000000000
  old mask 0xfffffffe3e3a7207
       cr2 0x0000000000000000
Nested traceback attempted via signal, from:
Page fault: Address not mapped
        r8 0x0000000000008802
        r9 0x00000000000001bd
       r10 0x0000000000000042
       r11 0x0000000000003293
       r12 0x00007f30d8f130c0
       r13 0x00007f30d8c16bc0
       r14 0x0000000000000000
       r15 0x00007f30d8c16bc0
       rdi 0x0000000000000000
       rsi 0x0000000000000004
       rbp 0x00007ffe18e661d0
       rbx 0x00007f30d5b96f80
       rdx 0x0000000000000000
       rax 0x0000000000000000
       rcx 0x0000000000000000
       rsp 0x00007ffe18e661c0
       rip 0x00007f30d22ab105
    eflags 0x0000000000013246
    csgsfs 0x0000000000000033
error code 0x0000000000000006
    vector 0x000000000000000e
  old mask 0xfffffffe3e3a7207
       cr2 0x0000000000000008

Cisco Adaptive Security Appliance Software Version 9.5(2)10

Compiled on Wed 25-May-16 17:38 PDT by builders
Hardware:   ASA5506
Crashinfo collected on 23:21:40.000 UTC Tue Aug 16 2016
ASLR enabled, text region 7f30d1558000-7f30d57a8a5c

Traceback:
0: 0x00007f30d225bd21
1: 0x00007f30d22a4f08
2: 0x00007f30d381251c
3: 0x00007f30d09f0180
4: 0x00007f30d22a5e33
5: 0x00007f30d38127bf
6: 0x00007f30d09f0180
7: 0x00007f30d229e413
8: 0x00007f30d458f1f2
9: 0x00007f30d3806ee0
10: 0x00007f30d229c5f5
11: 0x00007f30d3816879
12: 0x00007f30d227b8f9
13: 0x00007f30cde6ee05
-----------------------------------------------
Process shutdown finished
Rebooting... (status 0x8b)
..
INIT: Sending processes the TERM signal
Deconfiguring network interfaces... done.
Sending all processes the TERM signal...
Sending all processes the KILL signal...
Deactivating swap...
Unmounting local filesystems...
Rebooting... ÿ
Rom image verified correctly

Cisco Systems ROMMON, Version 1.1.8, RELEASE SOFTWARE
Copyright (c) 1994-2015  by Cisco Systems, Inc.
Compiled Thu 06/18/2015 12:15:56.43 by builders

Current image running: Boot ROM0
Last reset cause: PowerCycleRequest
DIMM Slot 0 : Present

%ERROR% - Did not find Octeon. Read failure!
%WARNING% - Failed to detect critical PCI devices.

Platform ASA5506 with 4096 Mbytes of main memory
MAC Address: 00:f2:8b:da:6c:c4

Thanks in advance

2 Replies 2

Marvin Rhoads
Hall of Fame
Hall of Fame

The Cavium Octeon is a processor chip inside the ASA 5506.

Failure to detect it during boot up indicates a hardware problem. You would need to contact TAC for a new unit if it's covered under a support contract. If it isn't covered, you may have to replace it yourself.

Hello Marvin,

 

I'm having the same error but I do not have warranty.

Does buying a Smartnet help or do you mean that I need to buy a new unit all together?

Review Cisco Networking for a $25 gift card