07-12-2021 10:59 AM
We're needing a second EIGRP instance running on our FTD. One is configured via FlexConfig, but when I attempt to add a second instance with a different AS, the FPR generates the following error:
TALDCFTD01 >> error : Too many IP routing processes for this routing protocol
ERROR: Unable to create router process
Config Error -- router eigrp 4
I just tested this on an ASA that is available to us, and it generates a similar error through CLI. I presume this is a limitation. Is there a workaround? Thanks
Solved! Go to Solution.
07-12-2021 11:37 AM
As per i know it supports 2 OSPF process ( we running Live now) , But Eigrip only 1
07-12-2021 11:37 AM
As per i know it supports 2 OSPF process ( we running Live now) , But Eigrip only 1
07-14-2021 09:03 AM
Thanks, BB!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide