Error when configuring two EIGRP routing instanced with Firepower 4110 managed by FMC

[ABaker94985]

We're needing a second EIGRP instance running on our FTD. One is configured via FlexConfig, but when I attempt to add a second instance with a different AS, the FPR generates the following error:

TALDCFTD01 >> error : Too many IP routing processes for this routing protocol
ERROR: Unable to create router process
Config Error -- router eigrp 4

I just tested this on an ASA that is available to us, and it generates a similar error through CLI. I presume this is a limitation. Is there a workaround? Thanks

[balaji.bandi · Accepted solution]

As per  i know it supports 2 OSPF process ( we running Live now) , But Eigrip only 1

https://www.cisco.com/c/en/us/td/docs/security/firepower/670/fdm/fptd-fdm-config-guide-670/fptd-fdm-eigrp.html

[ABaker94985]

Thanks, BB!