cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
910
Views
0
Helpful
5
Replies

FDM GUI ERROR-Unable to access web GUI for FDM

ipo.peniel_rg
Level 1
Level 1

Hi All,

I need assistance to login using my FDM GUI. Output below are on waiting state. I can access firewall through CLI. Refer screenshot of the login page with error.

ipopeniel_rg_0-1664941896366.png

 

root@rg-firepower-fw:/home/admin# pmtool status | grep -i waiting
TSS_Daemon (normal) - Waiting
idhttpsd (system,gui) - Waiting
sftunnel (system) - Waiting
sfmgr (system) - Waiting
sfmbservice (normal) - Waiting
run_hm (normal) - Waiting
sfestreamer (normal) - Waiting
sfipproxy (normal) - Waiting
rrd_server (normal) - Waiting
snmpd (normal) - Waiting
ngfwManager (normal) - Waiting
SSEConnector (system) - Waiting
dhcpd (normal) - Waiting
root@rg-firepower-fw:/home/admin#

5 Replies 5

Marvin Rhoads
Hall of Fame
Hall of Fame

Is this a new firewall? Can you tell us the model and software version? Has it ever worked? If so, what changed recently?

http://catb.org/~esr/faqs/smart-questions.html

It has been working perfectly. I re-imaged from ASA to FTD a year ago. Yesterday morning, i clicked on the "resync" button and that was the last time i saw FDM GUI.  

----------------[ rg-firepower-fw ]-----------------
Model : Cisco ASA5516-X Threat Defense (75) Version 6.3.0 (Build 83)
UUID : 07f26598-103c-11ec-999a-fc79f72d69d3
Rules update version : 2018-08-23-001-vrt
VDB version : 299

Despite it being  pretty old version, there's no good reason why the FDM GUI should stop working after a resync.

If you have a support contract, I would suggest opening a TAC case.

I did a restart and it came back online. all good now. thank you.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: