12-15-2021 10:59 PM
We have 2 wan links on the Firepower 1010 both are pppoe. We want to use wan as below no failover is required.
wan 1 for subnet 172.16.100.0/24 + 172.16.50.0/24
wan 2 for subnet 172.16.150.0/24
is it possible? as we can not set next hop IP in the route map.
Can we set interface (insted for IP address) in SET Statement in route map on Firepower 1010?
12-16-2021 02:26 PM
Which version are you running? In newer versions you should be able to set the egress interface as a "next hop". Depending on which version you are running, you will either be configuring this in the GUI or in FlexConfig.
12-17-2021 01:16 AM
Hi Marius,
Thank you for your reply.
I am currently on FDM 7.0.1
If it requires latest version I can upgrade to it.
Can you please share me the procedure?
Regards,
Prashant
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide