cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
311
Views
0
Helpful
2
Replies

FirePower 1100 lost smart registration

EdgarMurray8920
Level 1
Level 1

I have a FirePower 1100 for my home lab and for some reason, it lost DNS connectivity and lost registration. I did not notice and now I can't deploy changes. I connected to the CLI and tried to ping from system. When I try to ping from system I get the following message 

Temporary failure in name resolution

I can ping 8.8.8.8. Here is my show network command results

 

> show network
===============[ System Information ]===============
Hostname                  : firepower
DNS Servers               : 208.67.222.222
                            208.67.220.220
                            2620:119:35::35
DNS from router           : enabled
Management port           : 8305
IPv4 Default route
  Gateway                 : data-interfaces

==================[ management0 ]===================
Admin State               : enabled
Admin Speed               : 1gbps
Operation Speed           : 1gbps
Link                      : up
Channels                  : Management & Events
Mode                      : Non-Autonegotiation 
MDI/MDIX                  : Auto/MDIX 
MTU                       : 1500
MAC Address               : 64:3A:EA:54:C7:80
----------------------[ IPv4 ]----------------------
Configuration             : Manual
Address                   : 192.168.100.10
Netmask                   : 255.255.255.0
Gateway                   : 169.254.1.1
----------------------[ IPv6 ]----------------------
Configuration             : Disabled

===============[ Proxy Information ]================
State                     : Disabled
Authentication            : Disabled

I hope anyone can help me

2 Accepted Solutions

Accepted Solutions

balaji.bandi
Hall of Fame
Hall of Fame
Gateway                   : 169.254.1.1

this does not seems to be right for me ?

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

View solution in original post

I already solved the issue but was away form my computer to update the thread. 

 

I solved the issue using this thread Solved: Re: Not possible to register firepower 1120 - Cisco Community

 

The Gateway line will use that kind of IP Address when the option for the Management port to use the Data Interface gateway.

Gateway                   : 169.254.1.1

 

View solution in original post

2 Replies 2

balaji.bandi
Hall of Fame
Hall of Fame
Gateway                   : 169.254.1.1

this does not seems to be right for me ?

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

I already solved the issue but was away form my computer to update the thread. 

 

I solved the issue using this thread Solved: Re: Not possible to register firepower 1120 - Cisco Community

 

The Gateway line will use that kind of IP Address when the option for the Management port to use the Data Interface gateway.

Gateway                   : 169.254.1.1

 

Review Cisco Networking for a $25 gift card