08-11-2022 12:55 AM
Hello everyone,
we recently purchased a Cisco Firepower 1150. This is my first time installing a Firepower 1150 and plan to use FTD instead of ASA. Previously, I had only installed a Cisco ASA.
So my question is, as far as I know, FTD must be managed by FMC and ASA by ASDM. Is there another way to manage FTD without using FMC? I discovered that one of the solutions called "Device Manager" is it must be installed separately, similar to FMC using VM? and another solution known as CDO, which we do not want because it is cloud-based.
Thanks
Solved! Go to Solution.
08-11-2022 01:02 AM
@Azlan.my07 you don't need an FMC or CDO to manage the FTD, you can use Firepower Device Manager (FDM) to manage the device locally. To manage the device you just open a web browser and connect to the FTD IP address.
Just ensure when you set up the firewall for the first time it will ask you to manage device locally select yes.
https://www.cisco.com/c/en/us/td/docs/security/firepower/70/fdm/fptd-fdm-config-guide-700.html
https://www.youtube.com/watch?v=cqD_--e77LY
https://integratingit.wordpress.com/2020/02/08/ftd-configuration-using-fdm/
08-11-2022 01:02 AM
@Azlan.my07 you don't need an FMC or CDO to manage the FTD, you can use Firepower Device Manager (FDM) to manage the device locally. To manage the device you just open a web browser and connect to the FTD IP address.
Just ensure when you set up the firewall for the first time it will ask you to manage device locally select yes.
https://www.cisco.com/c/en/us/td/docs/security/firepower/70/fdm/fptd-fdm-config-guide-700.html
https://www.youtube.com/watch?v=cqD_--e77LY
https://integratingit.wordpress.com/2020/02/08/ftd-configuration-using-fdm/
08-11-2022 01:11 AM
Hi @Rob Ingram ,
Perfect!! thank you so much! you answer my question.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide