03-13-2019 02:19 AM
Hi Team, I´ll appreciate your help in the following case;
The customer is evaluating the replacement of old CheckPoint Firewalls and they are considering ASA.
They ASA systems in production in other departments and they would like to replace the CheckPoints with ASA.
In the evaluation, they need to activate the Identity Firewall option.
As a first point, in the ASA manuals the description appears with "AD Agent", which is EoL and is replaced by the CDA.
The customer needs to perform the test and they would like to have some documentation with Step-by-Step configuration.
We have tried to perform a test in the Lab with the latest CDA image with its latest patches (CDA 1.0.0.011 and patches 1 -> 6), an Active Directory based on Windows 2016 and an ASA 9.10.
There are problems with the CDA and the Active Directory, in the logs of the CDA we have the following error: "ADObserver: Error Querying for WMI property".
We found some reports about permissions and Registry Keys in AD but we still have the error.
- Any procedure for this configuration?
- Any comments or suggestions to configure the CDA with AD 2016 and ASA 9.10?
Thanks in Advance,
Solved! Go to Solution.
03-13-2019 05:07 AM - edited 03-13-2019 05:08 AM
After Posting my Last post, just want to take update of the product since long i have not seen that page, just visited the site and Latest Update on the CDA.
Found that Windows 2016 is listed there as supported version :
Suggesting - ISE-PIC (its time for me to put in my list to test again)
03-13-2019 05:00 AM
Tested some time back in the LAB with below Video that works as expected.
https://www.youtube.com/watch?v=l1vspZXtCjw
http://www.labminutes.com/sec0146_asa_cx_context_directory_agent_installation
03-13-2019 05:07 AM - edited 03-13-2019 05:08 AM
After Posting my Last post, just want to take update of the product since long i have not seen that page, just visited the site and Latest Update on the CDA.
Found that Windows 2016 is listed there as supported version :
Suggesting - ISE-PIC (its time for me to put in my list to test again)
03-14-2019 12:31 AM
Thx Balaji,
The information on videos was very helpful.
I was finally able to make it work.
Is there any issue reported with Windows 2016 ? now in Lab is working but is a very simple test.
Thanks.
03-14-2019 01:24 AM
To be honestly i have not tried, i may be building 2019 soon i will test that time 2016 (since we dont have requirement of 2016 / 2019) so not tried. please feel free to post your comments, and your welcome to offer any solution.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide