01-11-2017 09:39 AM - edited 03-12-2019 06:15 AM
Hi ,
we have an asa5525X whit firepower service installed on it , the firepower software version is 6.1.0 and also we have installed FMC verison 6.1.0 on my ESXi server , we can add and register firepower to our FMC but when the FMC wants to deploy configuration on Firepower sensor is always return error , "Deployment Failed duo to configuration error 1 , if problem persist after retrying , Contact cisco TAC".
we execute this command on our firepower as well
pmtool status |grep sftunnel
pmtool status |grep SFData
pmtool status |grep sfipproxy
and see the status is running
I attach the screenshot of error
how can we overcome to this issue ?
thanks
01-25-2017 06:07 AM
You should address this through TAC.
02-02-2017 01:31 PM
This could be a bug.
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvb93301/?referring_site=bugquickviewredir
--
Please select a correct answer and rate helpful posts
04-25-2017 03:08 PM
Having same issue after applying patches. Did you get this resolved?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide