Dear Experts, Can anyone please let me know the common ASA issues encountered on daily basis. Any link or resources to the above question would be really appreciable. Thanks Mohammed
Dear Experts, Can anyone please let me know the common ASA issues encountered on daily basis. Any link or resources to the above question would be really appreciable. Thanks Mohammed
Hello, We currently have a mix of Linux and Windows servers that are behind our Firepower/ASA devices. We're seeing an uptick in the BASH signatures firing (1:31977 and 1:31978 specifically). The problem is while it is an older rule, we don't want ...
I'm using putty. Consoled into the 5516X. However, whenever I open a session it immediately connects to the Sourcefire 3D software module and cannot exit to go into the ASA console. Everything looks fine through the ASDM interface but no matter what ...
hi I have connectivity Cisco ASA 5585-x with Cisco 4500 switch and i want to ask can i make the ASA side redundant-interface and the 4500 switch side interface port-channel interface is that allowed or compatible ?
Do I have to access ASDM via ASA management port? Or can I access it via other layer 3 ip address as long as there is connection? Thank you,
Outbound traffic works but inbound does not. I have checked my ACL and it looks correct, but I am still not seeing what I missed. I have attached our current running-config as well as a screenshot of the Packet Trace utility. Below is the detailed pa...
Where on Cisco's website can I find the rules update for the Firepower module?
Hello , I'm asking about Cisco Threat defense image. Many resources state there is still some limitations to this image, I tried to find a clear document covering this issue , but still can't find a clear list for unsupported features . Any Help ? Th...
Hi Guys, Just want to ask. What if I haven't installed the image of firepower services meaning I don't have GUI for Firepower for configuration. Is the services of firepower is running?. I mean all the AV, IPS or what ever the firepower is bundled. S...
Hello, I plan to migrate from a FortiGate firewall to a Cisco Firepower appliance. Are there any configuration migration tool or has anyone heard about any kind of solution how to convert the configuration file? Any ideas are welcome
We are in the process of bringing up a 2nd Internet connection in another location. I have 2 ASA 5520s, 8.4.6 (failover) that we use for VPN users and L2L connections. I would like to separate them and take one to the new location. What is the best w...
Hello Everybody I'm new with Cisco ASA and have a problem with the license. I would like to activate my Cisco ASA 5506-X Control License on my new Cisco ASA 5506-X. But the problem is when i try to get the licence over the cisco.com/go/license site, ...
I just purchased a 5506-x for a non-profit organization I am trying to support. I have been able to get the firewall installed and users are able to access the internet ok thru the firewall. Next, I want to enable remote web access via https (port ...
Hi. Cisco asa 5515-x. Trunk interface (192.168.0.x/24, 192.168.1.x/24, 192.168.2.x/24). WCCP Server ip 192.168.0.x/24. Will work well WCCP Server ? It has previously been cisco asa interface one subnet 192.168.0.x/24 and wccp server 192.168.0.x/24 - ...
I'm trying to figure out if the following is possible to do on a ASA5512 running 9.2(4)5. - set it for one external IP to many internal IP's with the same ports for the internal IP's external IP: 5.5.5.5 ports 80 and 443 internal IP#1: 192.168.1.31 p...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 09-22-2026 04:13 PM | ||
| 08-25-2026 06:22 PM | ||
| 08-24-2026 12:26 AM | ||
| 08-20-2026 05:54 AM | ||
| 08-19-2026 07:59 AM |
| User | Count |
|---|---|
| 6 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |