FMC cannot update from 6.1 to 6.2

[QW_netzwerk]

Recently I have updated all firewall from 9.6 to 9.8(2)24 and try to update the FMC from v6.1.0.6 to 6.2.0-362. Does anybody can assist me the steps to follow? All the firepower have 6.x Versions. 

180327 08:42:58] Readiness check for :Sourcefire_3D_Defense_Center_S3_Upgrade-6.2.0-362
[180327 08:42:58] #####################################
[180327 08:42:58] # UPGRADE READINESS CHECK STARTING
[180327 08:42:58] #####################################
[180327 08:42:58] SKIP 000_start/000_check_update.sh
[180327 08:42:58] BEGIN 000_start/100_start_messages.sh
[180327 08:42:59] SKIP 000_start/100_zz_verify_bundle.sh
[180327 08:42:59] SKIP 000_start/101_run_pruning.pl
[180327 08:42:59] BEGIN 000_start/102_check_sru_install_running.pl
[180327 08:42:59] BEGIN 000_start/105_check_model_number.sh
[180327 08:43:00] SKIP 000_start/106_check_HA_sync.pl
[180327 08:43:00] BEGIN 000_start/106_check_HA_updates.pl
[180327 08:43:00] BEGIN 000_start/107_version_check.sh
[180327 08:43:01] BEGIN 000_start/108_check_sensors_ver.pl
[180327 08:43:02] FAILED 000_start/108_check_sensors_ver.pl
[180327 08:43:02] continuing on next script due to readiness check.
[180327 08:43:02] BEGIN 000_start/109_check_HA_MDC_status.pl
[180327 08:43:03] BEGIN 000_start/110_DB_integrity_check.sh
[180327 08:43:18] BEGIN 000_start/111_FS_integrity_check.sh
[180327 08:43:18] BEGIN 000_start/112_CF_check.sh
[180327 08:43:19] BEGIN 000_start/113_EO_integrity_check.pl
[180327 08:43:59] SKIP 000_start/170_link_log.sh
[180327 08:43:59] BEGIN 000_start/250_check_system_files.sh
[180327 08:43:59] SKIP 000_start/320_remove_backups.sh
[180327 08:43:59] SKIP 000_start/400_run_troubleshoot.sh
[180327 08:43:59] BEGIN 000_start/410_check_disk_space.sh
[180327 08:44:05] BEGIN 200_pre/001_check_reg.pl
[180327 08:44:06] BEGIN 200_pre/002_check_mounts.sh
[180327 08:44:07] BEGIN 200_pre/003_check_health.sh
[180327 08:44:09] BEGIN 200_pre/005_check_manager.pl
[180327 08:44:10] BEGIN 200_pre/006_check_snort.sh
[180327 08:44:12] BEGIN 200_pre/007_check_sru_install.sh
[180327 08:44:20] BEGIN 200_pre/009_check_snort_preproc.sh
[180327 08:44:22] BEGIN 200_pre/011_check_self.sh
[180327 08:44:24] BEGIN 200_pre/015_verify_rpm.sh
[180327 08:44:26] BEGIN 200_pre/100_check_correlation_rules.pl
[180327 08:44:29] SKIP 200_pre/100_check_dashboards.pl
[180327 08:44:29] SKIP 200_pre/100_get_snort_from_dc.pl
[180327 08:44:29] BEGIN 200_pre/100_log_version.sh
[180327 08:44:29] SKIP 200_pre/110_setup_upgrade_ui.sh
[180327 08:44:29] SKIP 200_pre/120_generate_auth_for_upgrade_ui.pl
[180327 08:44:29] SKIP 200_pre/152_save_etc_sf.sh
[180327 08:44:29] SKIP 200_pre/199_before_maintenance_mode.sh
[180327 08:44:30] SKIP 200_pre/200_enable_maintenance_mode.pl
[180327 08:44:30] SKIP 200_pre/201_disable_faild.sh
[180327 08:44:30] SKIP 200_pre/202_disable_syncd.sh
[180327 08:44:30] SKIP 200_pre/400_restrict_rpc.sh
[180327 08:44:30] SKIP 200_pre/470_revert_prep.sh
[180327 08:44:30] SKIP 200_pre/500_stop_system.sh
[180327 08:44:30] SKIP 200_pre/501_recovery.sh
[180327 08:44:30] SKIP 200_pre/501_stop_blackbird_cards.sh
[180327 08:44:30] SKIP 200_pre/600_ftd_onbox_data_export.sh
[180327 08:44:30] SKIP 200_pre/999_enable_sync.sh
[180327 08:44:30] Readiness check completed....
[180327 08:44:30] Attempting to remove upgrade lock
[180327 08:44:30] Success, removed upgrade lock
[180327 08:44:30]
[180327 08:44:30] #######################################################
[180327 08:44:30] # UPGRADE READINESS CHECK COMPLETE status : FAILED! #
[180327 08:44:30] #######################################################

thanks in advance.

Saimun

[Marvin Rhoads · Accepted solution]

Your log indicates:

FAILED 000_start/108_check_sensors_ver.pl

Are all of the sensors 6.1? FMC 6.2 requires this.

See confirmation in the release notes here:

https://www.cisco.com/c/en/us/td/docs/security/firepower/620/relnotes/Firepower_System_Release_Notes_Version_620/management_capability.html#id_38695

[QW_netzwerk]

Hello Marvin,

thanks for your quick reply. Now I have seen the issue. Most of the sfr are version 6.0.x. So I am updating those versions to 6.1 first and will see what comes in the end. I have an issue to update already one one sfr from 5.4.1 to 6.0.0.5. So I removed that one at first from the firesight and reimaged it with 6.0.0.5. But it is not succeed. I am going to open another discussion for it.

Thanks again for your assist.