We have two networks connected over ADSL point-to-point connection(actually one side is MetroEthernet). Lets say A and B networks. On both sides there are Pix 501 and Pix515 respectively. There are computers located in A with i.e. 10.0.0.1/24, 10.0.0.2/24.. And in network B there is also a computer with the same subnet configuration. (i.e. 10.0.0.3/24), all computers do not have gateway addresses congfigured and they try to communicate each other over NetBIOS. So What i need to try is to connect the PC in B to A over this firewalls. Please note that it is almost impossible to change IP configuration of PCs. Is this possible??
