07-15-2009 04:30 AM - edited 03-11-2019 08:55 AM
Hi!
How can I check file names of IOS and asdm loaded to FWSM? If I load new version of IOS, how can I erase the old one? Is it rewrited automaticly?
Command "dir flash" shows only that they presented on the flash.
dir flash:
Directory of flash:/
2 -rw- 3394960 <no date> asdm
1 -rw- 6062080 <no date> image
Solved! Go to Solution.
07-15-2009 05:28 AM
You cannot. The flash can only take one image and one asdm unlike the PIX/ASA. When you issue
copy tftp flash:image
and
copy tftp flash:adsm
Both of them will get replaced. Upon reload
sh ver should tell you the image and the asdm version loaded.
Image upgrade/downgrade required a reload
asdm upgrade/downgrade does not require a reload.
07-15-2009 05:28 AM
You cannot. The flash can only take one image and one asdm unlike the PIX/ASA. When you issue
copy tftp flash:image
and
copy tftp flash:adsm
Both of them will get replaced. Upon reload
sh ver should tell you the image and the asdm version loaded.
Image upgrade/downgrade required a reload
asdm upgrade/downgrade does not require a reload.
07-15-2009 05:30 AM
Thank you very much!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide