cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
312
Views
0
Helpful
1
Replies

HELP ASDM JUST WONT RUN

don_chuks
Level 1
Level 1

          Please help, I cant get the ASDM to run. Please see config below

Cisco Adaptive Security Appliance Software Version 8.4(4)5

Device Manager Version 6.4(9)

Compiled on Wed 08-Aug-12 19:07 by builders

System image file is "disk0:/asa844-5-k8.bin"

Config file at boot was "startup-config"

ASA5505 up 53 mins 45 secs

Hardware:   ASA5505, 512 MB RAM, CPU Geode 500 MHz

Internal ATA Compact Flash, 128MB

BIOS Flash M50FW016 @ 0xfff00000, 2048KB

show run all ssl

ssl server-version any

ssl client-version any

ssl encryption des-sha1

sho asp table socket

Protocol  Socket    Local Address               Foreign Address         State

SSL       00039fef  xxx.yyy.zzz.mmm:443         0.0.0.0:*               LISTEN

SSL       0005479f  xxx.yyy.zzz.mmm:443         0.0.0.0:*               LISTEN

ASA5505(config)#

show run asdm

asdm image disk0:/asdm-649-103.bin

no asdm history enable

Please help.I can ping the ASA from the computer

1 Reply 1

I'm not 100% sure, but I remember something that the ASDM doesn't run with only DES for encryption. Please also activate stronger ciphers on the ASA. Beside that, these problems are most often caused by incompatible java versions. If you have an up-to-date java, then load the newest ASDM that is available. If your Java is older for some reason, try an older ASDM-version.


Sent from Cisco Technical Support iPad App

Review Cisco Networking for a $25 gift card