09-13-2022 10:42 PM
The default routing for the backbone is the firewall.
When I send packets from SW1 to SW2, I want to go through the firewall.
Any ideas?
Solved! Go to Solution.
09-14-2022 02:08 AM
- The simple layer2 network is flat , and as such communication between 2 devices on 2 switches can not be aware of intermediate devices, for that (what you ask) you need a changed and or routed. topology. The question in this topology would be equivalent to asking : how can I make traffic from port-x to port-y on the same switch go trough the firewall ?
M.
09-14-2022 02:08 AM
- The simple layer2 network is flat , and as such communication between 2 devices on 2 switches can not be aware of intermediate devices, for that (what you ask) you need a changed and or routed. topology. The question in this topology would be equivalent to asking : how can I make traffic from port-x to port-y on the same switch go trough the firewall ?
M.
09-15-2022 11:16 PM
you're right So I change the network and try to route to the firewall using PBR.
09-14-2022 03:29 AM
use ASA as transparent mode not router mode
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide