Hi.
show ifindex and show port ifindex only exists on CAT code.
For CAT 6k running IOS (native IOS), there is no command for this info. So if you want to check what snmp index is associated with what port/interface, you can do this as you would do on any router (IOS):
You need to poll ifName and ifIndex from a host machine and then correlate the two output to see what snmp index is assigned to what port. It's easiest to do from a UNIX server, but if you load any of the freeware polling software on to a PC you can also do it. Here's an example of the poll, and what to look for:
% snmpwalk -c public 172.16.100.30 ifName
IF-MIB::ifName.1 = STRING: Gi1/1
IF-MIB::ifName.2 = STRING: Gi1/2
IF-MIB::ifName.3 = STRING: Gi5/1
IF-MIB::ifName.4 = STRING: Gi5/2
IF-MIB::ifName.5 = STRING: Gi5/3
IF-MIB::ifName.6 = STRING: Gi5/4
IF-MIB::ifName.7 = STRING: Gi5/5
IF-MIB::ifName.8 = STRING: Gi5/6
IF-MIB::ifName.9 = STRING: Gi5/7
% snmpwalk -c public 172.16.100.30 ifIndex
IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.3 = INTEGER: 3
IF-MIB::ifIndex.4 = INTEGER: 4
IF-MIB::ifIndex.5 = INTEGER: 5
IF-MIB::ifIndex.6 = INTEGER: 6
IF-MIB::ifIndex.7 = INTEGER: 7
IF-MIB::ifIndex.8 = INTEGER: 8
IF-MIB::ifIndex.9 = INTEGER: 9
From the above 2 outputs, Gi5/7 is snmp index 9.
ifName is Oid .1.3.6.1.2.1.31.1.1.1.1 and ifIndex is oid .1.3.6.1.2.1.2.2.1.1
Hope this helps.
-J
